ENGLISH
When CD, AUX or VIDEO 1~ VIDEO 6 is selected
Select the digital or the analog input as
4 desired.
| STANDBY | POWER ON |
| AUD2 |
|
| SLEEP | D/A |
| DIMM | S.A/B |
or | ROOM2 | SUR.B |
T.TON | PURE | |
| OSD | PARA. |
PAGE1
•Each time this button is pressed, the corresponding input is selected as follows:
DIGITAL 
ANALOG
•When PHONO, TUNER or TAPE MONITOR is selected as an input source, the analog input is automatically selected.
Notes:
•When the selected digital input is not connected, “DIGITAL” is flickering, meaning no sound.(Refer to “ENJOYING SURROUND SOUND” on page 30.)
•To select the digital input, you should assign the connected DIGITAL IN to the corresponding input source. (For details, refer to “When selecting the DIGITAL INPUT SETUP” on page 53.)
Operate the selected component for
5 playback.
•When playing back the program sources with surround sound, refer to “ENJOYING SURROUND SOUND” on page 30.
Adjust the (overall) volume.
6
MAIN
| or | VOL | VOL |
|
|
DOWN | UP |
| 1 | 2 | 3 |
| 4 | 5 | 6 | ||
|
|
| 7 | 8 | 9 |
|
|
|
| 0 |
|
|
|
| MI | M2 | M3 |
Adjusting the tone (bass and treble)
Select the tone mode as desired.
7
•Each time this button is pressed, the tone mode changes as follows:
BASS 
TREBLE 
DEFEAT OFF(or ON) 
•The tone display is shown for several seconds.
•If the tone display disappears, press the TONE MODE button again.
•( ) : When the tone defeat function is activated (“DEFEAT ON”), bass and treble modes
cannot be selected Note:
•When the pure audio function is activated, the tone mode cannot be selected.
At the desired tone mode, adjust as
8 desired.
At the tone defeat mode, each time the MULTI CONTROL knob is rotated, the tone defeat mode changes as follows:
DEFEAT ON : When listening to a program source
without the tone effect.
DEFEAT OFF : When adjusting the tone for your taste.
At the desired tone (bass or treble), each time the MULTI CONTROL knob is rotated, the tone level can be adjusted within the range of +10~
•In general, we recommend the bass and treble to be adjusted to 0(flat) level.
•To complete tone adjustment, repeat the above steps
and 
.
•Extreme settings at high volume may damage your speakers.
25
