Sherwood R-965 manual Recording with Tape Monitor, Dubbing from video components onto

RECORDING

•The analog signals from the 8 CH DIRECT inputs as well as the digital signals from DIGITAL inputs or USB can be heard but cannot be recorded.

•The volume, channel level, tone(bass, treble) settings, etc. have no effect on the recording signals.

Recording with TAPE MONITOR					2	Start recoding on the component
						connected to TAPE MONITOR.
1	Select the desired input as a recording source
	except TAPE MONITOR.					Start play on the desired input.
					3
		STANDBY		POWER ON
		AUD1
		TUNER		VID1
		CD		VID2
	or	T.MON		VID3	• For tape monitor function, refer to “TAPE MONITOR
		PHONO		VID5
		AUX		VID4	function” on page 24.
			PAGE1
					• When the AUX IN/OUT jacks are connected to audio
• You can select “VID 6” on the page 2 of “AUD 1” on					recording component such as MD recorder, tape
					deck, etc., in the same manner, recording with AUX
the remote control.
					can be performed.
Dubbing from video components onto					2	Start recording on the component
						connected to VIDEO 1.
VIDEO 1
1	Select the desired input of VIDEO 2~ 6 as
	a recording source except VIDEO 1.				3	Start play on the desired input.
		STANDBY		POWER ON	• The audio and video signals from the desired input will be
		AUD1
		TUNER	VID1		dubbed onto the VIDEO 1and you can enjoy them on the
	or	CD	VID2
		AUX	VID4		TV set and from the speakers.
		T.MON	VID3
		PAGE1			• When the VIDEO 2(/ROOM 2) IN/OUT jacks are
		PHONO	VID5
					connected to video recording component such as video
					deck, etc., in the same manner, recording with VIDEO 2
• You can	select “VID 6” on the page 2 of “AUD 1” on				can be performed.
					(If this is the case, be sure to deactivate the ROOM 2
the remote control.					function and to set the VIDEO 2 OUT to On. For details,
					refer to “When selecting the VIDEO 2 OUT” on page 57.)
Dubbing the sound and image signals					2	Select VIDEO 2 as a image recording
separately onto VIDEO 1						source with performing “When selecting
						the CURRENT VIDEO” procedure on
Example) When dubbing the VIDEO 2 image signal and						page 55.
the CD sound signal separately onto VIDEO 1.

Select CD as an sound recording source.

1				Image source
		STANDBY	POWER ON	Sound source
		AUD1
		TUNER	VID1
		CD	VID2
	or	T.MON	VID3
		AUX	VID4

PHONO VID5

PAGE1

Image source

Sound source

ENGLISH

38