Sherwood R-965 Specifications, English, Amplifier Section, Digital Audio Section, Video Section

ENGLISH

Specifications

AMPLIFIER SECTION

• Power output, stereo mode, 8 Ω, THD 0.05%, 20 Hz~20 kHz 2 120 W

• Total harmonic distortion, 8 Ω, 120 W, 1 kHz 0.05 %

•Intermodulation distortion

60 Hz : 7 kHz = 4 : 1 SMPTE, 8 Ω, 120 W 0.09 %

•Input sensitivity/impedance

Phono (MM) 2.5 mV/47 kΩ

Line (CD, TAPE MONITOR, VIDEO) 200 mV/47 kΩ

•Signal to noise ratio, IHF “A” weighted

Phono (MM) 80 dB

Line (CD, TAPE MONITOR, VIDEO) 105 dB

•Frequency response

Phono (MM), RIAA, 30~20, 000Hz 1.0 dB

LINE (CD, TAPE MONITOR, VIDEO), 10~100,000 Hz +0, -3 dB

• Output level
TAPE MONITOR REC, 1 kΩ	200 mV
PRE OUT(Front, Center, Surround, Surround back, Subwoofer), 1 kΩ 1.0 V
• Bass/Treble control, 100 Hz/10 kHz	10 dB

• Surround mode, only channel driven
Front power output, 8 Ω, 1 kHz, THD 0.7 %	140 W+140 W
Center power output, 8 Ω, 1 kHz, THD 0.7 %	140 W
Surround power output, 8 Ω, 1 kHz, THD 0.7 %	140 W+140 W

Surround back/ROOM 2 power output, 8 Ω, 1 kHz, THD 0.7 % 140 W+140 W

DIGITAL AUDIO SECTION

• Sampling frequency 32, 44.1, 48, 96, 192 kHz

•Digital input level

Coaxial, 75 Ω	0.5 Vp-p
Optical, 660 nm	-15~-21 dBm
VIDEO SECTION
• Video format NTSC

•Input sensitivity(=Output level), 75 Ω

Video(Composite (normal))							1 Vp-p
S-Video(luminance signal)							1 Vp-p
	(chrominance signal)							0.286 Vp-p
Component video(R-Y signal)								0.5 Vp-p
				(B-Y signal)				0.5 Vp-p
				(Y signal)			1.0 Vp-p
FM TUNER SECTION
• Tuning frequency range					87.5~108 MHz
• Usable sensitivity, THD 3 %, S/N 30 dB									17.2 dBf
• 50 dB quieting sensitivity, mono/stereo									25.2/43.2 dBf
• Signal to noise ratio, 65 dBf, mono/stereo									72/68 dB
• Total harmonic distortion, 65 dBf, 1 kHz, mono/stereo										0.2/0.3 %
• Frequency response, 20 Hz~15 kHz								1.5 dB
• Stereo separation, 1 kHz					45 dB
• Capture ratio		3.0 dB
• IF rejection ratio			120 dB
AM TUNER SECTION
• Tuning frequency range					520~1710 kHz
• Usable sensitivity			12.5 mV
• Signal to noise ratio				51 dB
• Selectivity	30 dB
GENERAL
• Power supply		120 V~60 Hz
• Power consumption				7 A
• Switched AC outlets				TOTAL 100 W, 1A max.
• Dimensions(W	H		D)	440		196	450 mm(17-3/8			7-3/4 17-3/4 inches)

•Weight(Net) 23.5 kg(51.8 lbs)

Note: Design and specifications are subject to change without notice for improvements.

69