ENGLISH
When selecting the VIDEO 2 OUT
•When performing recording with the video recording component connected to VIDEO 2 (/ROOM 2) IN/OUT jacks, you should set the VIDEO 2 OUT to On and deactivate the ROOM 2 function.
Note: When the ROOM 2 function is activated, ROOM 2 source playback will be performed regardless of the VIDEO 2 OUT setting.
Press the CURSOR UP(
)/DOWN(
)
1 buttons to select the VIDEO 2 OUT.
PAGE MAIN FAV
VOL
1 2 3
4 5 6
7 8 9
0
MI M2 M3
Press the CURSOR LEFT( 
)/RIGHT(
)
2 buttons to select the desired mode.
PAGE | MAIN | FAV |
VOL |
|
|
1 2 3
4 5 6
7 8 9
0
MI M2 M3
•Each time these buttons are pressed, the mode changes as follows:
On : Select this to output the signals of the selected source as a recording (main room) source from the VIDEO 2/ROOM 2 OUTs.
Off : Select this not to output the signals.
When selecting the DC TRIGGER 2 SETUP
•To turn on the component connected to DC TRIGGER OUT 2 jack when the desired input source is selected, you should link DC TRIGGER 2 with the desired input source.
Press the CURSOR UP(
)/DOWN(
) buttons to select the DC TRIGGER 2, then press the ENTER
1 button.
PAGE | MAIN | FAV |
VOL |
|
|
1 2 3
4 5 6
7 8 9
0
D C T R I GG E R 2 S E T U P
D C T R I G GE R | : Off |
|
T U N E R | V I D E O 1 | |
C D | V I D E O | 2 |
A U X | V I D E O | 3 |
T A P E MON . | V I D E O | 4 |
P H ON O | V I D E O | 5 |
| V I D E O | 6 |
E N T E R : S e t | , , , : M o v e | |
2
MI M2 M3
Press the CURSOR LEFT(
)/RIGHT(
) buttons to select the DC TRIGGER 2 mode as desired.
• Each time these buttons are pressed, the DC TRIGGER 2 mode changes as follows:
PAGE | MAIN | FAV |
VOL |
| On : Select this to activate the DC trigger function. |
|
| Off : Select this to cancel the DC trigger function. |
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
| 0 |
|
MI | M2 | M3 |
|
|
57
