8. CONNECTING SYSTEM CONTROL
•Connect this jack to the DIGI LINK jack of the external Sherwood component that uses the DIGI LINK II or III remote control system.
Sherwood component with DIGI LINK II or III
CD player
Tape deck
DVD player
System control cord
ENGLISH
9. CONNECTING DC TRIGGER OUTs
•Connect components that need to be triggered by DC under certain conditions as follows :
• Connect a component to DC TRIGGER OUT 1 jack that allows DC 12 V to turn on or off when this unit’s power is turned on or off.
• Connect a component to DC TRIGGER OUT 2 jack that |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Component to be triggered |
allows DC 12 V to turn on or off when a specific input |
|
|
|
|
|
|
|
|
|
|
|
|
|
| by DC when a specific input |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1 | 2 |
|
|
|
|
|
|
|
|
| source is selected | ||||
DC TRIGGER OUT |
|
|
|
|
|
|
|
| |||||||
source is selected or not. | 12V d.c. 100mA |
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
•For details, refer to the operating instructions of the components to be connected.
•To link DC TRIGGER OUT 2 with a specific input source, refer to “When selecting the DC TRIGGER 2 SETUP” on page 57.
Notes :
•This output voltage (12 V d.c., 100mA ) is for (status) control only, it is not sufficient for drive capability.
•When making DC TRIGGER connection, you should use the stereo mini cord, not a mono mini cord.
ROOM 2 connections
•ROOM 2 playback feature allows you to play a different program source in another room as well as one source in the main room at the same time.
•For ROOM 2 playback, connect the VIDEO 2 / ROOM 2 OUT jacks and the COAXIAL DIGITAL OUT to the amplifier, TV. etc. installed in another room, or connect the SURROUND BACK speaker terminals to the speakers.
•In case of using a pair of speakers only, you should assign the power amplifier for surround back channels to the ROOM 2. (For details, refer to “SETTING THE POWER AMP ASSIGN” on page 45.)
Note :
•To minimize hum or noise, use high quality connection cords.
Main room
•When connecting VIDEO 2/ROOM 2 OUTs to the components.
This receiver
•When connecting SURROUND BACK speaker terminals to the speakers.
This receiver
Another room(Room 2)
ININ
TV or projector
LAUDIO
R IN
COAXIAL
DIGITAL IN
AmplifierSpeakers
Speakers
left right
12
