Sherwood R-965 manual Connecting MULTI-ROOM System KIT

ENGLISH

10. CONNECTING MULTI-ROOM SYSTEM KIT

•The multi-room system kit(sold separately ) is essential for operation from a remote location .

For information on the multi-room system kit, contact the Xantech corporation at 1-800-843-5465 or www.xantech.com.

•IR IN jack allow you to control this receiver from another room with the remote control unit.

•To control this receiver from another room with the remote control unit, connect the IR IN jack to the output of the connecting block.

•If this receiver is located inside a cabinet or other enclosure where the infrared beams from the remote control unit cannot enter, then operation with the remote control unit will not be possible. In such a case, connect the IR IN jack to the output of the connecting block.

•To control other compatible component from another room with the universal remote control unit, connect the IR OUT jack to the IR emitter.

Note:

•Remote operation may become unreliable if the IR receiver is exposed to strong light such as direct sunlight or inverted fluorescent.

Main room		Another room(Room 2)
	Connecting block
	(Multi-room system kit)
	output
		IR receiver
		(Multi-room system kit)
This receiver	DVD player
	IR emitter
	(Multi-room system kit)

•When this receiver is located inside a cabinet.

In the cabinet

output
Connecting block	IR receiver
(Multi-room system kit)	(Multi-room system kit)

This receiver

11. CONNECTING MICROPHONE

•To use Auto Speaker Setup function, connect the supplied microphone to the SETUP MIC jack.(For details, refer to

“When selecting the AUTO SPEAKER SETUP” on page 51.)

Notes:

• Because the microphone for Auto Speaker Setup is

designed for use with this receiver, do not use a	Microphone
microphone other than the one supplied with this receiver.

•After you have completed the auto speaker setup procedure, disconnect the microphone.

13