HP RM500SL manual FastFacts 5.1 Networking Networking requirements

5Networking

5.1Section overview

The RM500SL may be connected to a network using a Cat 5, RJ-45 cable. This allows screen images to be printed on a network printer or on a shared printer on a networked PC. Images and underlying data may also be saved to a shared folder on a networked PC. See 6: Printing and Storing Results for details. The RM500SL may also be connected to a single computer using a network hub.

This section covers the following topics:

5.2: Networking requirements

5.3: Networking setup

5.4: Single computer connection

FastFacts 5.1: Networking

5.2Networking requirements

The RM500SL may be connected to a network using a Cat 5, RJ-45 cable. The network connector is next to the serial number label on the recessed panel. For automatic address assignment, the network must have a Dynamic Host Configuration Protocol (DHCP) server.

For manual addressing, the remote computer must be running Windows 95 or higher, File and Printer Sharing for Microsoft Networks must be enabled and the TCP/IP Connection must be configured so that the IP address of the remote computer is on the same subnet as the RM500SL. These settings should be obtained from your network administrator.

FastFacts 5.2: Networking requirements

0611 RM500SL User’s Guide Version 2.8 Page 22