HP RM500SL 16.4 Audiometric data entry, FastFacts 16.4: Audiometric data entry, To enter assessment data and parameters manually:

16.4 Audiometric data entry

Threshold data and parameters may be entered by scanning a barcode on a previous RM500SL or Verifit printout or manually using a mouse, the keypad or the numeric keypad on an external keyboard. See 2.6: Mouse, keyboard, barcode scanner, and 3.2: Input device operation.

To enter data from a barcode see 3.3: Barcode data input and:

1)Press the barcode trigger and center the red line on the barcode from a distance of 6 - 8”. The scanner will beep and the Barcode Entry poster opens.

2)Highlight and <PICK> [Done] to accept the data indicated on the poster.

To enter assessment data and parameters manually:

1)Highlight and <PICK> [Audiometry].

2)Highlight and <PICK> [Transducer], then highlight and <PICK> from the list.

3)Highlight and <PICK> [REUR], then highlight and <PICK> to toggle selection.

Measured REUR should be used with a soundfield threshold because individual REUR is part of the threshold. Average REUR should be used with headphone or insert phone thresholds because individual REUR isn’t part of

these thresholds.

4)When all selections have been completed, press <Continue>.

5)Enter HL threshold values using a mouse or keypad. Left click the mouse on the audiogram form to enter a point. Click again to delete the point. On the keypad use the arrow keys to change frequency and level and press <PICK> to enter or delete a threshold point.

6)Press <Continue> when all points have been entered.

FastFacts 16.4: Audiometric data entry

0611 RM500SL User’s Guide Version 2.8 Page 66