1.Earpiece jack — accepts the 2.5mm plug for the earpiece.
2.Charging port — docks to Revolabs HD Charger Bases.
3.Pocket clip — also used to attach microphone to a lapel, blouse or lanyard.
4.Mute Button — press to mute,
5.Acoustic Cover — protects delicate microphone element
6.LED display — visual status for mute,
Note: Microphones in new systems must be paired to the Base Station with each microphone assigned to a unique channel on the base unit. See pairing instructions below.
Revolabs HD Wearable Microphones turn on and mute automatically when removed from Charger Base, to reduce noise while being attached.
To use the HD Wearable Microphone:
1.Remove the microphone from the Charger Base.
2.Attach the microphone to clothing or to a lanyard, position microphone just above the sternum or breastbone, within 6 - 12 inches (15 – 30cm) from the mouth is recommended. Make sure microphone is attached securely with the microphone LED indicator pointed up toward mouth.
3.With the microphone in the wearing position,
4.To turn microphones off, return the microphone unit to the Charger Base or press and hold the Mute button for ~10 seconds until the LED turns solid RED then release button.
If the microphones are moved out of range of the Base Station (~300 feet or 90 meters) the connection will be dropped (LED flashes all red, green, yellow) and the microphone will mute.
After 15 seconds the microphone will beep 5 times, and will continue beeping every 30 seconds to remind the user to return the microphone to the conference room. If the microphone is moved back into range within 15 minutes the connection will automatically be
- 14 -