Revolabs 03-hdvenujp, 03-hdvenucn, 01-hdvenu To use the HD Directional Tabletop Microphone

3.With the microphone in position on the table, un-mute the microphone by pressing and releasing the Mute button (confirm by a flashing GREEN LED).

4.To turn microphone off, return the microphone unit to the Charger Base or press and hold the Mute button for ~10 seconds until the LED turns solid RED and release button.

If the microphones are placed too far from the Base Station (~300 feet or 90 meters) the connection will be dropped (LED flashes all colors) and the microphone will mute. After 15 seconds the microphone will beep 5 times, and will continue beeping every 30 seconds to indicating it‘s out of range.

Move the microphone closer to the Base Station and the connection will automatically be re- established to its original state, and the beeping will cease. If not, the microphone will continue beeping until it turns off in about 15 minutes.

Using the HD Directional Tabletop Wireless Boundary Microphones

The HD Tabletop Wireless Microphone, shown below, is designed to provide optimum coverage when placed on a conference room table in front of one or two people.

Pickup	45	6
patter	45

n

			5
	1
	2	3	4
1.	LED display — visual status for mute, un-mute, and pairing.
2.	Rubber feet — non-slip, vibration absorbing pads.
3.	Audio jack — accepts a 2.5mm plug.
4.	Charging port — docks to Revolabs HD Charger Bases.
5.	Mute button — press to mute, un-mute and pair microphone.
6.	Acoustic Cover — protects microphone element (non-removable).

To use the HD Directional Tabletop Microphone:

- 16 -