Revolabs 01-ELITEEXEC8 System set-up, Revolabs Executive Elite Audio Connections, Analog Audio

Page 22

System set-up

Once the Remote Antenna Receiver has been connected to the Base DSP unit, connect that unit to the power mains and turn the switch on the front of the unit to “1” from “0”. The unit will now power up. You will see messages on the front screen providing information until the unit is operational. Once the Screen with the VU screen is shown, and the Antenna symbol is constant, the system is operational.

For additional system configuration instructions, see later sections describing the different user interfaces in this manual.

Revolabs Executive Elite Audio Connections

The Executive Elite Base DSP unit offers three different ways to deliver the audio from the microphones to post-processing equipment as well as to provide back channel audio to the microphones.

While all three audio output paths will be active at all times, only one of the back-channel audio paths can be active. The user interfaces allow selecting which path should deliver the audio back to the microphones.

Analog Audio

The back panel of the Executive Elite DSP eight channel base unit provides eight 3.5mm Euroblock inputs and eight 3.5mm Euroblock outputs (the four channel unit provides four input and four output connectors), providing access to each channel’s audio signal.

The Euroblock connectors included in the package are designed for easy wiring. The three terminals (from left to right) correspond to positive +, negative -, and shielded ground G.

To connect audio In/Out on the Base Station:

1.Use the screws on top of the connector to first open the terminals.

2.Insert an appropriate 3-conductor cable (2 conductors and shield) into the terminals.

3.Tighten the screw to secure the cable.

4.Push the connector onto the pins centered under the desired input or output port on the back of the Base DSP unit until firmly secured.

The microphone output connectors need to be attached to the line-level (0dBu) input connectors of the post-processing audio equipment (mixer, DSP).

If the analog audio in is used for the back-channel audio, the Base DSP Unit input connectors (also 0dBu) may then be attached to the output channels of the post-processing equipment.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Revolabs Executive Elite ModelsExeceliteguide EN Contents 101 Introduction Safety and General Information FCC Notice to UsersFor Body Worn Operation Professional Installation RecommendedIndustry Canada Notice to Users RF ExposureNorth America Upcs Usage Restriction Restricted use with certain medical devicesExport Law Assurances European Union Usage RestrictionModel Number Description Weee Notification Safety Warnings Glossary Page Components Page Page Base DSP Unit InstallationFront View Page Remote Antenna Receiver TOP Connect Remote Antenna Receiver to Base DSP Unit Revolabs Executive Elite Audio Connections System set-upAnalog Audio Microphone Density and Radio Frequency Interference Synchronizing Executive Elite unitsAVB Audio Selecting Synchronization MethodSynchronization Bus AVB SynchronizationOTA Synchronization1 Front panel user interface Home Screens Page Page Page Front Panel Menu Tree Main MenuSystem Information System Settings Page Audio Settings Microphone Management Connecting to the local web UI Local Web UILogon First time usage Page Monitor Page Page Input Signal Microphone AudioDigital Output FiltersAnalog Output Start Frequency Center Frequency End FrequencyAudio Management Manage GroupsPage Page System Audio Settings System Management System Configuration Available in Version Network Management RF Spectrum Analyzer RF Power External Control Configuration Administration Page Factory Default Settings Web UI Feature Default SettingDNS1 RevoCloud Access Software Upgrade RevoCloud Creating a revoCloud Account RevoCloud Home Page System Information Account ManagementSerial Command & Return Strings Serial Control Processor Room Control InterfaceChannel # ExamplesString Tables For the complete listProperty/Action Command Format Description Response Property/Action Command Format Description Response Property/Action Command Format Description Response Notifications Notifications Notification Format DescriptionNotifications Notification Format Description Firmware updates Microphones Elite Wearable Wireless Microphones Page Adjusting the Volume on the Wearable Microphone Earpiece Page Page Elite Directional Wireless Tabletop Boundary Microphones Page Page Page Elite Wireless XLR Adapter Page Page Page Batteries Page LED patterns Mute Groups Unmute at StartupPush to Talk Individual MuteTableTop mute Chairman MicrophoneMute lock Warranty GPL Licensed Software License Type Web addressName Version License Type Xmos AVBAntenna Symbol Blinking TroubleshootingAccessing the Web UI through the Front Panel USB Technical SupportSpecifications Product Dimensions102 Microphone Polar Patterns103 Index104

03-ELITEEXEC4-TW, 03-ELITEEXEC8-JP, 03-ELITEEXEC8-EU, 01-ELITEEXEC4, 03-ELITEEXEC8-TW specifications

Revolabs, a prominent player in the field of professional audio conferencing solutions, offers a range of innovative products tailored to enhance communication in various environments. Among their offerings, the Revolabs Elite series stands out, particularly models such as the 03-ELITEEXEC4-EU, 03-ELITEEXEC4-JP, 01-ELITEEXEC8, 03-ELITEEXEC8-TW, and 01-ELITEEXEC4.

The 03-ELITEEXEC4-EU and 03-ELITEEXEC4-JP models are designed for seamless integration into conference rooms, simplifying the communication process in any setting. These devices utilize advanced audio processing technologies to deliver crystal-clear sound, ensuring that every voice is captured accurately, even in noisy environments. The four-channel capability allows users to connect multiple microphones, making it an ideal choice for larger meetings or presentations.

For users in Taiwan, the 03-ELITEEXEC8-TW offers similar features but is optimized for local needs, helping facilitate effective communication within the region. The eight-channel arrangement allows for even more flexibility, enabling up to eight microphones to be connected simultaneously. This model is especially beneficial for larger teams who require robust audio solutions in diverse settings.

The 01-ELITEEXEC8 is a versatile model that shares many characteristics with its counterparts but provides a wider array of connectivity options. With options for wired and wireless connections, users can adapt their audio setup according to their specific needs. This model is particularly suitable for enterprises looking to future-proof their audio solutions, as it supports various conferencing platforms and technologies.

Lastly, the 01-ELITEEXEC4 is a compact yet powerful solution perfect for smaller meeting spaces. Despite its smaller size, it maintains excellent audio quality and offers similar functionalities as its larger brethren.

All Revolabs Elite models feature cutting-edge technology such as automatic gain control and noise reduction, ensuring that conversations are clear and intelligible. Additionally, they come equipped with interference-free wireless technology, providing dependable connections without the hassle of cables.

In summary, the Revolabs Elite series, including models like the 03-ELITEEXEC4-EU, 03-ELITEEXEC4-JP, 01-ELITEEXEC8, 03-ELITEEXEC8-TW, and 01-ELITEEXEC4, delivers exceptional audio performance and flexibility to users. These products are engineered to meet the demands of modern communication, making them ideal choices for organizations aiming to elevate their conferencing experiences.
Top Page Image Contents