Revolabs 03-ELITEEXEC8-JP, 03-ELITEEXEC8-TW, 03-ELITEEXEC4-TW, 03-ELITEEXEC8-EU, 03-ELITEEXEC4-JP

Page 92

show any activity on the channel LED and front panel LCD, and will be shown as “Not Paired” on the web interfaces.

During pairing, the microphone LEDs and the channel LED on the front of the Base DSP Unit will stay solid red.

Only one microphone can be paired to any single Base DSP channel at a time. Any Base DSP Unit will protect against several channels pairing at the same time. However, if pairing is started from several Base DSP Units and microphones in parallel, microphones might pair to any of the Base DSP Units currently in paring mode.

Both the front panel interface and the web interface support a pairing wizard, managing pairing of several microphones in succession. This supports setup of new systems with multiple microphones to be paired.

To pair an individual microphone to the Base DSP Station and the Remote Antenna:

1.Turn the microphone off (no LED activity). If the microphone is ON, touch and hold the Mute area or press the mute button for about 10 seconds until the LED turns solid red. Release the touch area or mute button to turn the unit off. Note that the microphone beeps once after about 5 seconds while holding the mute button. This does not indicate that the microphone is switched off.

2.Place the microphone into pairing mode by touching the Mute area or holding the mute button for several seconds until the LED turns solid red and then release the touch area or button. The LED first turns green; do not release the touch area at that time. Once the LED is constant red, the microphone is in pairing mode.

3.Within one minute put the desired channel of the Base DSP Station into pairing mode using either of the management interfaces of the Elite Base DSP Station. See page Error! Bookmark not defined. on how to put a microphone channel into pairing mode using the front panel, or go to the monitor or microphone audio page of the local web UI and press the pair button on the channel you want to pair the microphone to. The LED on the front panel for that channel will turn solid red. Once the LEDs on the front panel and on the microphone start flashing either red (muted) or green (unmuted) pairing is complete.

4.If pairing fails, the microphone LEDs will start blinking red-green if it was not paired before. If the microphone was paired to a different channel on the same Base DSP Station or to a different Base DSP Station before, it will try to link back to that channel. Previous pairing information is not deleted on the microphone during a failed pairing attempt.

92

Page 91 Page 93
Image 92
Page 91 Page 93
Contents Revolabs Executive Elite ModelsExeceliteguide EN Contents 101 Introduction Safety and General Information FCC Notice to UsersProfessional Installation Recommended Industry Canada Notice to UsersFor Body Worn Operation RF ExposureRestricted use with certain medical devices Export Law AssurancesNorth America Upcs Usage Restriction European Union Usage RestrictionModel Number Description Weee Notification Safety Warnings Glossary Page Components Page Page Front View InstallationBase DSP Unit Page Remote Antenna Receiver TOP Connect Remote Antenna Receiver to Base DSP Unit Analog Audio System set-upRevolabs Executive Elite Audio Connections Synchronizing Executive Elite units AVB AudioMicrophone Density and Radio Frequency Interference Selecting Synchronization MethodSynchronization Bus AVB SynchronizationOTA Synchronization1 Front panel user interface Home Screens Page Page Page Front Panel Menu Tree Main MenuSystem Information System Settings Page Audio Settings Microphone Management Connecting to the local web UI Local Web UILogon First time usage Page Monitor Page Page Input Signal Microphone AudioFilters Analog OutputDigital Output Start Frequency Center Frequency End FrequencyAudio Management Manage GroupsPage Page System Audio Settings System Management System Configuration Available in Version Network Management RF Spectrum Analyzer RF Power External Control Configuration Administration Page Factory Default Settings Web UI Feature Default SettingDNS1 RevoCloud Access Software Upgrade RevoCloud Creating a revoCloud Account RevoCloud Home Page System Information Account ManagementSerial Command & Return Strings Serial Control Processor Room Control InterfaceChannel # ExamplesString Tables For the complete listProperty/Action Command Format Description Response Property/Action Command Format Description Response Property/Action Command Format Description Response Notifications Notifications Notification Format DescriptionNotifications Notification Format Description Firmware updates Microphones Elite Wearable Wireless Microphones Page Adjusting the Volume on the Wearable Microphone Earpiece Page Page Elite Directional Wireless Tabletop Boundary Microphones Page Page Page Elite Wireless XLR Adapter Page Page Page Batteries Page LED patterns Mute Groups Unmute at StartupIndividual Mute TableTop mutePush to Talk Chairman MicrophoneMute lock Warranty GPL Licensed Software License Type Web addressName Version License Type Xmos AVBTroubleshooting Accessing the Web UI through the Front Panel USBAntenna Symbol Blinking Technical SupportSpecifications Product Dimensions102 Microphone Polar Patterns103 Index104

03-ELITEEXEC4-TW, 03-ELITEEXEC8-JP, 03-ELITEEXEC8-EU, 01-ELITEEXEC4, 03-ELITEEXEC8-TW specifications

Revolabs, a prominent player in the field of professional audio conferencing solutions, offers a range of innovative products tailored to enhance communication in various environments. Among their offerings, the Revolabs Elite series stands out, particularly models such as the 03-ELITEEXEC4-EU, 03-ELITEEXEC4-JP, 01-ELITEEXEC8, 03-ELITEEXEC8-TW, and 01-ELITEEXEC4.

The 03-ELITEEXEC4-EU and 03-ELITEEXEC4-JP models are designed for seamless integration into conference rooms, simplifying the communication process in any setting. These devices utilize advanced audio processing technologies to deliver crystal-clear sound, ensuring that every voice is captured accurately, even in noisy environments. The four-channel capability allows users to connect multiple microphones, making it an ideal choice for larger meetings or presentations.

For users in Taiwan, the 03-ELITEEXEC8-TW offers similar features but is optimized for local needs, helping facilitate effective communication within the region. The eight-channel arrangement allows for even more flexibility, enabling up to eight microphones to be connected simultaneously. This model is especially beneficial for larger teams who require robust audio solutions in diverse settings.

The 01-ELITEEXEC8 is a versatile model that shares many characteristics with its counterparts but provides a wider array of connectivity options. With options for wired and wireless connections, users can adapt their audio setup according to their specific needs. This model is particularly suitable for enterprises looking to future-proof their audio solutions, as it supports various conferencing platforms and technologies.

Lastly, the 01-ELITEEXEC4 is a compact yet powerful solution perfect for smaller meeting spaces. Despite its smaller size, it maintains excellent audio quality and offers similar functionalities as its larger brethren.

All Revolabs Elite models feature cutting-edge technology such as automatic gain control and noise reduction, ensuring that conversations are clear and intelligible. Additionally, they come equipped with interference-free wireless technology, providing dependable connections without the hassle of cables.

In summary, the Revolabs Elite series, including models like the 03-ELITEEXEC4-EU, 03-ELITEEXEC4-JP, 01-ELITEEXEC8, 03-ELITEEXEC8-TW, and 01-ELITEEXEC4, delivers exceptional audio performance and flexibility to users. These products are engineered to meet the demands of modern communication, making them ideal choices for organizations aiming to elevate their conferencing experiences.
Top Page Image Contents