Revolabs 01-ELITEEXEC8, 03-ELITEEXEC8-TW, 03-ELITEEXEC4-TW, 03-ELITEEXEC8-EU, 03-ELITEEXEC4-JP

Page 86

To use either of the Elite Gooseneck Tabletop Microphones:

1.Remove the microphone from the Charger Base. The microphone will automatically turn on. Based on settings in the Base DSP, the microphone will start either un-muted or muted, indicated by green or red blinking lights, respectively.

2.Gooseneck Tabletop microphones should be located on the table with the microphone pointing toward the user, trying to keep the microphone 18 to 24 inches (45 to 60 cm) from the speaker. The pick-up pattern for this directional microphone is cardioid, focusing a “beam” towards the speaker. It is always better for the microphone to be as close to the person speaking as possible, but avoid placing the microphone where it might be blocked by equipment or paperwork. Avoid placing microphones too close to an audio or video conference speaker to avoid echoes. Make sure that the microphone is always placed standing on its rubber feet atop a flat surface. Refer to the diagram below:

3.With the microphone in position on the table, see the picture above for example, mute or un-mute the microphone by touching the mute area (confirm by flashing green or flashing red LEDs, respectively). In push-to- talk mode, touch the mute area and keep the finger there to unmute the microphone. Removing the finger from the touch area will mute the microphone again.

4.To turn the microphone off, return it to the Charger Tray or touch and hold the Mute touch area for about 10 seconds until the LEDs turn solid red, and remove the finger. The microphone can also be turned off from the local web UI or the room control interface. In push to talk mode the microphone cannot be shut down using the mute area.

If the microphones are placed too far away from the Remote Antenna (depending on the RF power setting this can be 300 feet, 90 meters, or more) the connection will be dropped (LEDs flash red-yellow-green-yellow) and the microphone will mute. After 15 seconds the microphone will beep, and will continue beeping every 30 seconds to indicating that it is out of range.

Move the microphone closer to the Remote Antenna and the connection will automatically be re-established to its original state, and the beeping will cease. Otherwise, the microphone will continue beeping until it turns off after about 15 minutes.

86

Page 85 Page 87
Image 86
Page 85 Page 87
Contents Revolabs Executive Elite ModelsExeceliteguide EN Contents 101 Introduction Safety and General Information FCC Notice to UsersFor Body Worn Operation Professional Installation RecommendedIndustry Canada Notice to Users RF ExposureNorth America Upcs Usage Restriction Restricted use with certain medical devicesExport Law Assurances European Union Usage RestrictionModel Number Description Weee Notification Safety Warnings Glossary Page Components Page Page Front View InstallationBase DSP Unit Page Remote Antenna Receiver TOP Connect Remote Antenna Receiver to Base DSP Unit Analog Audio System set-upRevolabs Executive Elite Audio Connections Microphone Density and Radio Frequency Interference Synchronizing Executive Elite unitsAVB Audio Selecting Synchronization MethodSynchronization Bus AVB SynchronizationOTA Synchronization1 Front panel user interface Home Screens Page Page Page Front Panel Menu Tree Main MenuSystem Information System Settings Page Audio Settings Microphone Management Connecting to the local web UI Local Web UILogon First time usage Page Monitor Page Page Input Signal Microphone AudioDigital Output FiltersAnalog Output Start Frequency Center Frequency End FrequencyAudio Management Manage GroupsPage Page System Audio Settings System Management System Configuration Available in Version Network Management RF Spectrum Analyzer RF Power External Control Configuration Administration Page Factory Default Settings Web UI Feature Default SettingDNS1 RevoCloud Access Software Upgrade RevoCloud Creating a revoCloud Account RevoCloud Home Page System Information Account ManagementSerial Command & Return Strings Serial Control Processor Room Control InterfaceChannel # ExamplesString Tables For the complete listProperty/Action Command Format Description Response Property/Action Command Format Description Response Property/Action Command Format Description Response Notifications Notifications Notification Format DescriptionNotifications Notification Format Description Firmware updates Microphones Elite Wearable Wireless Microphones Page Adjusting the Volume on the Wearable Microphone Earpiece Page Page Elite Directional Wireless Tabletop Boundary Microphones Page Page Page Elite Wireless XLR Adapter Page Page Page Batteries Page LED patterns Mute Groups Unmute at StartupPush to Talk Individual MuteTableTop mute Chairman MicrophoneMute lock Warranty GPL Licensed Software License Type Web addressName Version License Type Xmos AVBAntenna Symbol Blinking TroubleshootingAccessing the Web UI through the Front Panel USB Technical SupportSpecifications Product Dimensions102 Microphone Polar Patterns103 Index104

03-ELITEEXEC4-TW, 03-ELITEEXEC8-JP, 03-ELITEEXEC8-EU, 01-ELITEEXEC4, 03-ELITEEXEC8-TW specifications

Revolabs, a prominent player in the field of professional audio conferencing solutions, offers a range of innovative products tailored to enhance communication in various environments. Among their offerings, the Revolabs Elite series stands out, particularly models such as the 03-ELITEEXEC4-EU, 03-ELITEEXEC4-JP, 01-ELITEEXEC8, 03-ELITEEXEC8-TW, and 01-ELITEEXEC4.

The 03-ELITEEXEC4-EU and 03-ELITEEXEC4-JP models are designed for seamless integration into conference rooms, simplifying the communication process in any setting. These devices utilize advanced audio processing technologies to deliver crystal-clear sound, ensuring that every voice is captured accurately, even in noisy environments. The four-channel capability allows users to connect multiple microphones, making it an ideal choice for larger meetings or presentations.

For users in Taiwan, the 03-ELITEEXEC8-TW offers similar features but is optimized for local needs, helping facilitate effective communication within the region. The eight-channel arrangement allows for even more flexibility, enabling up to eight microphones to be connected simultaneously. This model is especially beneficial for larger teams who require robust audio solutions in diverse settings.

The 01-ELITEEXEC8 is a versatile model that shares many characteristics with its counterparts but provides a wider array of connectivity options. With options for wired and wireless connections, users can adapt their audio setup according to their specific needs. This model is particularly suitable for enterprises looking to future-proof their audio solutions, as it supports various conferencing platforms and technologies.

Lastly, the 01-ELITEEXEC4 is a compact yet powerful solution perfect for smaller meeting spaces. Despite its smaller size, it maintains excellent audio quality and offers similar functionalities as its larger brethren.

All Revolabs Elite models feature cutting-edge technology such as automatic gain control and noise reduction, ensuring that conversations are clear and intelligible. Additionally, they come equipped with interference-free wireless technology, providing dependable connections without the hassle of cables.

In summary, the Revolabs Elite series, including models like the 03-ELITEEXEC4-EU, 03-ELITEEXEC4-JP, 01-ELITEEXEC8, 03-ELITEEXEC8-TW, and 01-ELITEEXEC4, delivers exceptional audio performance and flexibility to users. These products are engineered to meet the demands of modern communication, making them ideal choices for organizations aiming to elevate their conferencing experiences.
Top Page Image Contents