To Install the Base Station:
The Revolabs HD Venue™ Base Station is designed to be installed into a standard 19‖ AV rack using the attached rack ears.
1.Install the HD Venue System into the rack.
2.Plug the power cord into an appropriate outlet
3.Connect the necessary outputs and inputs
Revolabs HD Venue™ Base Station Audio Connections
There are two 3.5mm balanced inputs (either ¼‖ or XLR) and two 3.5mm balanced outputs (either ¼‖ or XLR) on the back panel of the unit providing access to each channel’s audio signal.
¼‖ jacks are configured as follows:
Tip | positive |
Ring | negative |
Sleeve | ground |
XLR connectors are configured as follows:
Pin 1 | ground |
Pin 2 | positive |
Pin 3 | negative |
There are two output channels representing a separate channel for each microphone. The microphone output connectors need to be attached to the input connectors of an audio mixer.
The Base Station input connectors (also 0 dBu) may then be attached to mixer channel outputs. Because the system is
- 6 -