Revolabs 02-DSKSYS, 04-DSKSYSEU LED Status Indications, Warranty, LED Pattern Meaning

Page 13

LED Status Indications

The following LED patterns are shown on either the Microphone or the Charger Base.

LED Pattern

Meaning

Solid GREEN

Confirmation of power-up or battery

(Microphone only*)

reaching full charge. * In earlier versions

 

LED will turn OFF when fully charged.

Solid RED

Pairing mode, or confirmation of powering-

 

down, or battery charging.

GREEN flash every 1.5

Microphone paired, connected and un-

seconds

muted.

Two RED flashes every

Microphone paired, connected and muted.

1.5 seconds

 

YELLOW flash

Microphone paired, connected, un-muted

alternating with GREEN

and battery low.

flash

 

YELLOW flash

Microphone paired, connected, muted and

alternating with two RED

battery low.

flashes

 

Alternating RED,

Searching for a connection, or out of radio

YELLOW, GREEN,

range. The Microphone will try to re-

YELLOW (Microphone

establish the link for about 15 minutes, and

only)

then turn off automatically. The Microphone

 

will beep five times every 30 seconds.

Alternating slow RED

Microphone is not paired to Base Station.

and GREEN

 

Rapid RED flashes

Radio congestion – it is not possible to

continuing for more than

make a radio connection because there are

a few seconds

already too many nearby users, or there is

 

heavy radio interference. Interference may

 

be caused by some types of digital cordless

 

phones, and other Revolabs Solo™

 

installations.

Groups of five rapid red

Unit is faulty. Please contact your place of

flashes

purchase for advice on return.

Warranty

Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective part or unit (at the discretion of the Seller) will be free of charge for the period of 90 days.

Any attempt by the user to alter the equipment, or equipment damaged by negligence, accident, or Acts of God voids this warranty.

The Seller shall not be liable for any consequential damage resulting from the malfunction of this product. Should the user experience unsatisfactory performance from this equipment, contact the Seller to obtain instructions for return, or replacement, as deemed necessary.

This warranty is not transferable by the original end user.

Revolabs, Inc.

63 Great Road

Maynard, MA 01754

www.revolabs.com

1-800-326-1088

22

23

Image 13
Contents Revolabs, Inc Installation and Operation GuideFCC User Information and Notice Table of ContentsIndustry Canada Notice to Users Restricted use with certain medical devices Hearing AidsExport Law Assurances Other Medical DevicesDsksys North America Upcs Usage Restriction Dsksyseu European Union Usage RestrictionSystem Components IntroductionRevolabs Solo Single Channel Charger Base Installing the Solo Single Channel System Page Page Using with Wearable Wireless Microphone Revolabs Solo Wireless MicrophonesUsing with XLR Microphone Wireless Adapter Using with TableTop MicrophonePower/Charging Port docks to all Solo Charger Bases When to Charge Using with a Solo Executive Multi-channel SystemSetting the Broadcast Power Level Charging the BatteriesPairing the Microphone to the Charger Base LED Status Indications WarrantyLED Pattern Meaning Solo Single Channel Specifications