Mute Button
Pressing the MUTE button toggles between muting (flashing RED LED status) and
Note: Press the MUTE button on a Microphone will similarly toggle between mute and
Power Module
The Charger Base requires 5VDC power. Plug the supplied AC adapter into a convenient
USB Connection
Use the supplied cable to connect the mini USB connector to the Charger Base and the standard end to your computer USB port.
External Audio Connection
The Single Channel System includes a cable for connecting the Charger Base to an external audio or conferencing system. The provided 2.5mm miniplug-
Installing the Solo Single Channel System
The Revolabs Solo™ Single Channel system is easily installed into either the office or conference room environment. Simply plug the power supply into a convenient outlet and attach the USB cable to a computer or laptop, or connect the 2.5mm audio cables to an audio system. Power is not provided by the USB cable.
Computer Software Set-up
Use the supplied USB cable to connect the mini USB connector to the Charger Base and the standard end to your computer USB port. Your computer will alert you that it has found a new USB device.
It is possible to configure your computer settings to playback audio through the earpiece attached to the Wearable microphone (default settings) or through the computer speakers (internal or desktop).
The following examples use the Microsoft Windows® XP Operating System Classic settings. You may notice slight differences in appearance when using other Windows operating systems.
To modify the default microphone earpiece audio output settings:
1.At the
2.Select Settings and Control Panel.
3.Click the Sounds and Audio Devices icon.
6 | 7 |