Pioneer VSX-517-S/-K manual Connecting up Chapter, Making cable connections

Page 12

03Connecting up

Chapter 3:

Connecting up

Video cables

Making cable connections

Make sure not to bend the cables over the top of this unit. If this happens, the magnetic field produced by the transformers in this unit may cause a humming noise from the speakers.

Important

•Before making or changing any connections, switch off the power and disconnect the power cord from the AC outlet.

•Before unplugging the power cord, switch the power into standby.

Analog audio cables

Use stereo RCA phono cables to connect analog audio components. These cables are typically red and white, and you should connect the red plugs to R (right) terminals and white plugs to L (left) terminals.

Analog audio cables

Right (red)

Left (white)

Digital audio cables

Commercially available coaxial digital audio cables or optical cables should be used to connect digital components to this receiver.1

Coaxial digital audio cable

Optical cable

Note

Standard RCA video cables

These cables are the most common type of video connection and should be used to connect to the composite video terminals. They have yellow plugs to distinguish them from cables for audio.

Standard RCA video cable

S-video cables

VSX-817 model only

S-video cables give you a clearer picture reproduction than standard RCA video cables by sending separate signals for the luminance and color.

S Video

Component video cables

Use component video cables to get the best possible color reproduction of your video source. The color signal of the TV is divided into the luminance (Y) signal and the color (PB and PR) signals and then output. In this way, interference between the signals is avoided.

Component video cables

Green (Y)

Blue (PB)

Red (PR)

1• When connecting optical cables, be careful when inserting the plug not to damage the shutter protecting the optical socket.

•When storing optical cable, coil loosely. The cable may be damaged if bent around sharp corners.

•You can also use a standard RCA video cable for coaxial digital connections.

12

En

Page 11 Page 13
Image 12
Page 11 Page 13
Contents VSX-517-S/-KVSX-817-S/-K Important the Moulded Plug Risk of Electric Shock Do not OpenVoltage selector Ventilation CautionOperating Environment Contents Bi-wiring your speakers Troubleshooting Resetting the main unitPower cord caution Specifications Cleaning the unit Other connectionsBefore you start Before you start ChapterChecking what’s in the box Loading the batteries Operating range of remote control unit Installing the receiverBefore you start Minute guide 02 5 minute guide ChapterIntroduction to home theater Listening to Surround SoundUsing the Quick Setup Minute guideNederlands Español Automatically setting up for surround sound Mcacc 02 5 minute guideOther problems during Auto Mcacc EnterConnecting up Connecting up ChapterMaking cable connections Connecting up Connecting a TV and DVD player Connecting up Connecting the multichannel analog outputsConnect a set of audio/video outputs on VSX-817 model Use an optical cable forConnecting other audio components About the WMA9 Pro decoder132 Connecting other video components Using the component video jacksConnecting to the front panel video terminal Connecting to the front panel audio mini jackComp 1 DVD Comp 2 TV Comp 3 DVR See Assigning the component video inputs onConnecting up Connecting antennas Using external antennasTo improve FM reception To improve AM receptionConnecting up Connecting the speakers Hints on speaker placement Speaker terminalsVSX-517 model VSX-817 modelSpeaker placement diagrams View of 7.1 channel speaker setupOverhead view of speaker setup Following illustrations show 7.1 channel speaker setups.1Controls and displays Controls and displays ChapterFront panel STANDBY/ONControls and displays Controls and displays Display Remote control VSX-817 Phase Master Volume +ADV.SURR DialogAccess 6TUNE/ST +/- /ENTERSubtitle RECRemote control VSX-517 SignalInfo ShiftVolume + Input Selector buttonsDVD/DVR 10 /ENTERSwitches between the three banks classes of station presets Confirm and exit the current menu screen12 DVD/DVR control buttons Tuner controlsListening to your system Listening to your system ChapterAuto playback Listening in surround soundSetting the effect options Using the Advanced surround effectsSetting What it does Listening to your systemUsing Front Stage Surround Advance Listening in stereoStereo See Listening in stereo above for more on this Listening to your system Using Stream Direct Choosing the input signalListening with Acoustic Calibration EQ AUTOSURR. See Auto playback onUsing Virtual Surround Back VSB VSB OFF Virtual Surround Back mode is switched offUsing Phase Control Press Phase Phase Control to switch on phase correctionListening to your system Using Midnight and Loudness Using the tone controlsUsing the Sound Retriever Enhancing dialogSelecting the front audio inputs Selecting the multichannel analog inputsSystem Setup menu System Setup menu ChapterUsing the System Setup menu Surround back speaker settingSystem Setup menu Manual Mcacc speaker setupFine Channel Level Fine Speaker Distance Acoustic Calibration EQDeutsch Copying your Acoustic Calibration EQ settings Setting the Acoustic Calibration EQ manuallyManual speaker setup Speaker settingChecking your Acoustic Calibration EQ settings Crossover network Channel levelInput Assign menu Speaker DistanceAssigning the digital inputs Assigning the component video inputsOther setup menu Dynamic Range Control SetupDual Mono Setup LFE Attenuator SetupUsing the tuner Using the tuner ChapterSaving station presets Listening to the radioUsing the tuner Listening to station presetsChanging the frequency step Press AM or FM to select the tunerMaking recordings Making recordings ChapterMaking an audio or a video recording Setting the remote to control other components Selecting preset codes directlyUse the number buttons to enter the preset code Controlling the rest of your systemClearing all the remote control settings Controlling the rest of your system Direct functionControlling the rest of your system Controls for TVs Buttons Function ComponentsInput SelectControlling the rest of your system Controls for other componentsDisc Button s Function ComponentsFunction Components Enter GuideCH + HDDControlling the rest of your system Preset Code List On digital STBDVD Recorder Manufacturer CodeSecond Zone speaker B setup Switching the speaker systemOther connections Other connections ChapterBi-wiring your speakers Other connections Bi-amping your front speakersFrançais Troubleshooting Problem RemedyAdditional information Additional information ChapterPhase Control Additional informationLfeatt Additional information Resetting the main unit Power cord cautionPress Setup to confirm OK? shows in the displayAdditional information Specifications Cleaning the unit AM Tuner SectionMiscellaneous Furnished PartsPioneer Corporation

VSX-517-S/-K specifications

The Pioneer VSX-517-S/-K is a noteworthy addition to the realm of home theater receivers, offering a blend of performance, versatility, and user-friendly features. This model is popularly recognized for its impressive audio capabilities, making it a great choice for both casual listeners and audiophiles alike.

One of the key features of the VSX-517 is its 5.1 channel surround sound system. This allows users to enjoy immersive audio experiences, whether they are watching movies, playing video games, or listening to music. The receiver delivers a robust power output, enabling dynamic sound reproduction that can fill a room, enhancing the overall entertainment experience.

The VSX-517 is equipped with Dolby Digital and DTS decoding technologies, which are staples in the industry for delivering high-quality sound reproduction. This ensures that the audio is as close to the original recording as possible, providing an engaging listening experience. Additionally, the receiver supports a range of other audio formats, allowing users to enjoy their favorite media without restrictions.

Another attractive feature of the VSX-517 is its advanced setup options. The receiver includes an on-screen graphical user interface that simplifies the installation and configuration process. This user-friendly interface allows users to easily adjust settings according to their preferences, making it more accessible for those who may not be tech-savvy.

The VSX-517 also boasts multiple inputs and outputs, including HDMI, component, composite, and digital audio inputs, ensuring compatibility with various devices such as Blu-ray players, gaming consoles, and streaming devices. This versatility means that users can connect their entire entertainment system to one central hub, streamlining their setup.

In terms of user convenience, the remote control is designed for intuitive operation, allowing easy access to essential functions such as volume control, input selection, and audio adjustments directly from the comfort of the couch.

The amplifier section of the Pioneer VSX-517 features Class D technology, which contributes to its efficiency. This means that the device can produce a remarkable sound output while consuming less power, making it an eco-friendly option for users.

Overall, the Pioneer VSX-517-S/-K stands out for its combination of strong audio performance, versatility in connectivity, and user-friendly features, making it an appealing choice for consumers looking to elevate their home entertainment experience without breaking the bank.
Top Page Image Contents