Pioneer VSX-517-S/-K manual Additional information, Lfeatt, Phase Control

Page 59

Additional information

11

Problem

Remedy

No sound from surround or

• Connect the speakers properly (refer to page 19).

center speakers.

• Refer to Speaker setting on page 43 to check the speaker settings.

 

• Refer to Channel level on page 44 to check the speaker levels.

 

 

VSX-817 model only – No sound

• Refer to Speaker setting on page 43 to check the surround back

from surround back speakers.

speaker settings.

 

• Refer to Channel level on page 44 to check the speaker levels.

 

• Refer to Using surround back channel processing on page 35 to

 

make sure surround back processing and the sound mode are set for

 

surround back sound.

 

 

No sound from subwoofer.

• Make sure the subwoofer is switched on.

 

• If the subwoofer has a volume knob, make sure it’s turned up.

 

• The Dolby Digital or DTS source you are listening to may not have

 

an LFE channel.

 

• Switch the subwoofer setting in Speaker setting on page 43 to YES

 

or PLUS.

 

• Switch the LFE Attenuator Setup on page 46 to LFEATT 0 or

 

LFEATT 10.

 

 

The PHASE CONTROL

• If applicable, check that the lowpass filter switch on your

feature doesn’t seem to have

subwoofer is off, or the lowpass cutoff is set to the highest frequency

an audible effect.

setting. If there is a PHASE setting on your subwoofer, set it to 0º (or

 

depending on the subwoofer, the setting where you think it has the

 

best overall effect on the sound).

 

• Make sure the speaker distance setting is correct for all speakers

 

(see Speaker Distance on page 45).

 

 

Noise during playback of a

• Move the cassette deck further from your receiver, until the noise

cassette deck.

disappears.

 

 

No sound is output or a noise

• Set the digital volume level of the player to full, or to the neutral

is output when software with

position.

DTS is played back.

 

 

 

During a playback search,

• This is not a malfunction, but be sure to turn the volume down to

noise is output from a DTS

prevent the output of loud noise from your speakers.

compatible CD player.

 

 

 

Can’t operate the remote

• Replace the batteries (refer to page 6).

control.

• Operate within 7 m, 30° of the remote sensor on the front panel

 

(refer to page 7).

 

• Remove the obstacle or operate from another position.

 

• Avoid exposing the remote sensor on the front panel to direct light.

 

 

The display is dark or off.

• Press DIMMER on the remote repeatedly to return to the default.

 

 

English Deutsch Français Italiano Nederlands Español

59

En

Page 58 Page 60
Image 59
Page 58 Page 60
Contents VSX-517-S/-KVSX-817-S/-K Risk of Electric Shock Do not Open Important the Moulded PlugOperating Environment Voltage selectorVentilation Caution Contents Other connections Bi-wiring your speakersTroubleshooting Resetting the main unit Power cord caution Specifications Cleaning the unitChecking what’s in the box Loading the batteries Before you startBefore you start Chapter Before you start Operating range of remote control unitInstalling the receiver Listening to Surround Sound Minute guide02 5 minute guide Chapter Introduction to home theaterNederlands Español Using the Quick SetupMinute guide 02 5 minute guide Automatically setting up for surround sound McaccEnter Other problems during Auto McaccMaking cable connections Connecting upConnecting up Chapter Connecting up Connecting a TV and DVD player VSX-817 model Use an optical cable for Connecting upConnecting the multichannel analog outputs Connect a set of audio/video outputs on132 Connecting other audio componentsAbout the WMA9 Pro decoder Using the component video jacks Connecting other video componentsSee Assigning the component video inputs on Connecting to the front panel video terminalConnecting to the front panel audio mini jack Comp 1 DVD Comp 2 TV Comp 3 DVRTo improve AM reception Connecting up Connecting antennasUsing external antennas To improve FM receptionConnecting up Connecting the speakers VSX-817 model Hints on speaker placementSpeaker terminals VSX-517 modelFollowing illustrations show 7.1 channel speaker setups.1 Speaker placement diagramsView of 7.1 channel speaker setup Overhead view of speaker setupSTANDBY/ON Controls and displaysControls and displays Chapter Front panelControls and displays Controls and displays Display Remote control VSX-817 Dialog PhaseMaster Volume + ADV.SURRREC Access6TUNE/ST +/- /ENTER SubtitleShift Remote control VSX-517Signal Info10 /ENTER Volume +Input Selector buttons DVD/DVRTuner controls Switches between the three banks classes of station presetsConfirm and exit the current menu screen 12 DVD/DVR control buttonsListening in surround sound Listening to your systemListening to your system Chapter Auto playbackListening to your system Setting the effect optionsUsing the Advanced surround effects Setting What it doesStereo See Listening in stereo above for more on this Using Front Stage Surround AdvanceListening in stereo AUTOSURR. See Auto playback on Listening to your system Using Stream DirectChoosing the input signal Listening with Acoustic Calibration EQVSB OFF Virtual Surround Back mode is switched off Using Virtual Surround Back VSBPress Phase Phase Control to switch on phase correction Using Phase ControlEnhancing dialog Listening to your system Using Midnight and LoudnessUsing the tone controls Using the Sound RetrieverSelecting the multichannel analog inputs Selecting the front audio inputsSurround back speaker setting System Setup menuSystem Setup menu Chapter Using the System Setup menuFine Channel Level System Setup menuManual Mcacc speaker setup Deutsch Fine Speaker DistanceAcoustic Calibration EQ Setting the Acoustic Calibration EQ manually Copying your Acoustic Calibration EQ settingsChecking your Acoustic Calibration EQ settings Manual speaker setupSpeaker setting Channel level Crossover networkAssigning the component video inputs Input Assign menuSpeaker Distance Assigning the digital inputsLFE Attenuator Setup Other setup menuDynamic Range Control Setup Dual Mono SetupListening to the radio Using the tunerUsing the tuner Chapter Saving station presetsPress AM or FM to select the tuner Using the tunerListening to station presets Changing the frequency stepMaking an audio or a video recording Making recordingsMaking recordings Chapter Controlling the rest of your system Setting the remote to control other componentsSelecting preset codes directly Use the number buttons to enter the preset codeControlling the rest of your system Direct function Clearing all the remote control settingsSelect Controlling the rest of your system Controls for TVsButtons Function Components InputButton s Function Components Controlling the rest of your systemControls for other components DiscHDD Function ComponentsEnter Guide CH +Manufacturer Code Controlling the rest of your system Preset Code ListOn digital STB DVD RecorderOther connections Chapter Second Zone speaker B setupSwitching the speaker system Other connectionsFrançais Bi-wiring your speakersOther connections Bi-amping your front speakers Additional information Chapter TroubleshootingProblem Remedy Additional informationLfeatt Phase ControlAdditional information OK? shows in the display Additional information Resetting the main unitPower cord caution Press Setup to confirmAdditional information Specifications Furnished Parts Cleaning the unitAM Tuner Section MiscellaneousPioneer Corporation

VSX-517-S/-K specifications

The Pioneer VSX-517-S/-K is a noteworthy addition to the realm of home theater receivers, offering a blend of performance, versatility, and user-friendly features. This model is popularly recognized for its impressive audio capabilities, making it a great choice for both casual listeners and audiophiles alike.

One of the key features of the VSX-517 is its 5.1 channel surround sound system. This allows users to enjoy immersive audio experiences, whether they are watching movies, playing video games, or listening to music. The receiver delivers a robust power output, enabling dynamic sound reproduction that can fill a room, enhancing the overall entertainment experience.

The VSX-517 is equipped with Dolby Digital and DTS decoding technologies, which are staples in the industry for delivering high-quality sound reproduction. This ensures that the audio is as close to the original recording as possible, providing an engaging listening experience. Additionally, the receiver supports a range of other audio formats, allowing users to enjoy their favorite media without restrictions.

Another attractive feature of the VSX-517 is its advanced setup options. The receiver includes an on-screen graphical user interface that simplifies the installation and configuration process. This user-friendly interface allows users to easily adjust settings according to their preferences, making it more accessible for those who may not be tech-savvy.

The VSX-517 also boasts multiple inputs and outputs, including HDMI, component, composite, and digital audio inputs, ensuring compatibility with various devices such as Blu-ray players, gaming consoles, and streaming devices. This versatility means that users can connect their entire entertainment system to one central hub, streamlining their setup.

In terms of user convenience, the remote control is designed for intuitive operation, allowing easy access to essential functions such as volume control, input selection, and audio adjustments directly from the comfort of the couch.

The amplifier section of the Pioneer VSX-517 features Class D technology, which contributes to its efficiency. This means that the device can produce a remarkable sound output while consuming less power, making it an eco-friendly option for users.

Overall, the Pioneer VSX-517-S/-K stands out for its combination of strong audio performance, versatility in connectivity, and user-friendly features, making it an appealing choice for consumers looking to elevate their home entertainment experience without breaking the bank.
Top Page Image Contents