Pioneer VSX-917V manual Additional information, Phase Control feature

Page 67

Additional information

12

Problem

Remedy

The PHASE CONTROL feature

• If applicable, check that the lowpass filter switch on your subwoofer is off, or the

doesn’t seem to have an

lowpass cutoff is set to the highest frequency setting. If there is a PHASE setting on

audible effect.

your subwoofer, set it to 0º (or depending on the subwoofer, the setting where you

 

think it has the best overall effect on the sound).

 

• Make sure the speaker distance setting is correct for all speakers (see Speaker

 

Distance on page 43).

 

 

Considerable noise in radio

• Connect the antenna (page 18) and adjust the position for best reception.

broadcasts.

• Route any loose cables away from the antenna terminals and wires.

 

• Fully extend the FM wire antenna, position for best reception, and secure to a wall

 

(or connect an outdoor FM antenna).

 

• Connect an additional internal or external AM antenna (page 18).

 

• Turn off equipment causing interference or move it away from the receiver (or

 

move antennas farther away from equipment causing noise).

 

 

Broadcast stations cannot be

• Connect an outdoor antenna (refer to page 18).

selected automatically.

 

 

 

Noise during playback of a

• Move the cassette deck away from your receiver, until the noise disappears.

cassette deck.

 

 

 

Sound is produced from other

• Set the SIGNAL SELECT to AUTO, DIGITAL or ANALOG according to the type of

components, but not from LD

connections made. (refer to page 33).

or DVD player.

• Set the digital input settings correctly (refer to page 62).

 

• Make digital connections (refer to page 13) and set the SIGNAL SELECT to

 

DIGITAL (refer to page 33).

 

• Refer to the instruction manual supplied with the DVD player.

 

 

No sound is output or a noise

• Set the digital volume level of the player to full, or to the neutral position.

is output when software with

• Make sure the player's settings are correct and/or the DTS signal out is on. Refer

DTS is played back.

to the instruction manual supplied with the DVD player.

 

• Set the input signal type to DIGITAL (see Choosing the input signal on page 33)

 

 

During a playback search,

• This is not a malfunction, but be sure to turn the volume down to prevent the

noise is output from a DTS

output of loud noise from your speakers.

compatible CD player.

 

 

 

Everything seems to be set up

Check that the positive/negative speaker terminals on the receiver are matched with

correctly, but the playback

the corresponding terminals on the speakers (see Connecting the speakers on

sound is odd.

page 19).

 

 

There seems to be a time lag

• See Automatically setting up for surround sound (MCACC) on page 8 to set up your

between the speakers and the

system again using MCACC (this will automatically compensate for a delay in the

output of the subwoofer.

subwoofer output).

 

 

After using the Auto MCACC

• Low-frequency noise could have been caused by an air conditioner or motor.

Setup, the speaker size setting

Switch off all appliances in the room and rerun the Auto MCACC Setup.

(LARGE or SMALL) is incorrect.

 

 

 

Can’t operate the remote

• Replace the batteries (refer to page 6).

control.

• Operate within 7 m (23 ft.), 30° of the remote sensor (refer to page 27).

 

• Remove the obstacle or operate from another position.

 

• Avoid exposing the remote sensor on the front panel to direct light.

 

• Unplug anything connected to the CONTROL IN jack and use remote normally

 

(see Operating other Pioneer components on page 47).

 

 

English Deutsch Français Italiano Nederlands Español

67

En

Page 66 Page 68
Image 67
Page 66 Page 68
Contents VSX-917V Federal Communications Commission Declaration of Conformity Information to UserRisk of Electric Shock Do not Open Contents Additional information Other SettingsControlling the rest of your system Other connectionsLoading the batteries Before you startBefore you start Chapter Checking what’s in the boxListening to Surround Sound Minute guideMinute guide Chapter Introduction to home theater02 5 minute guide Automatically setting up for surround sound McaccMake sure ‘OK’ is selected, then press Minute guideFollow the instructions on-screen Wait for the test tones to finishOther problems when using the Auto Mcacc Setup Better sound using Phase ControlPress Phase Phase Control to switch on phase correction Connecting up Chapter Connecting upMaking cable connections Connecting up About the video converter English Deutsch Connecting up Connecting a DVD player and TVFrançais Italiano Use an optical cable for the connection.4 This receiver Connecting upConnecting the multichannel analog outputs Audio and Video inputs on this receiver.2Italiano Nederlands Español Connecting other audio componentsAbout the WMA9 Pro decoder English Deutsch FrançaisThis receiver Connecting other video componentsConnecting to the front panel video terminal Using the component video jacksConnecting to the front panel audio mini jack To improve AM reception Connecting up Connecting antennasUsing external antennas To improve FM receptionThis receiver Powered Connecting up Connecting the speakersEnglish Deutsch Français Italiano Fig. a Hints on speaker placementView of 7.1 channel speaker setup Overhead view of speaker setupAC outlet Controls and displays Chapter Controls and displaysFront panel Español Controls and displaysDisplay English Deutsch Français Italiano NederlandsAuto Surr DigitalVIR.SB DirectRECEIVER Controls and displays Remote controlDeutsch Français Italiano Number buttons and other receiver/ component controlsReceiver Control buttons  TUNE/ST +/- /ENTERTV Control buttons Component control buttonsOperating range of remote control Listening in surround sound Listening to your systemListening to your system Chapter Auto playbackUsing the Advanced surround effects Setting the effect optionsListening to your system Imageb Using Front Stage Surround AdvanceUsing Stream Direct Listening in stereoCustom 1/2 Custom settings Using surround back channel processingListening with Acoustic Calibration EQ Using Virtual Surround Back VSB Using Midnight and LoudnessEnhancing dialog Listening to your system Using the Sound RetrieverUsing the tone controls Choosing the input signalPlayback the connected component Digital Selects an optical or coaxial digital signalPress F.AUDIO SHIFT+DVD on the remote control Selecting the front audio inputsSelect the setting you want to adjust System Setup menuSystem Setup menu Chapter Surround back speaker settingSelect the surround back speaker setting System Setup menuManual Mcacc speaker setup Select ‘Surr Back System’ from the System Setup menuFine Speaker Distance Fine Channel LevelAcoustic Calibration EQ Setting the Acoustic Calibration EQ automaticallySelect ‘EQ Auto Setting’ from the Manual Mcacc setup menu Wait for the Auto Mcacc Setup to finishManually Setting the Acoustic Calibration EQChecking your Acoustic Calibration EQ settings Manual speaker setupManual SP Setup menu Speaker SettingFrançais Italiano Nederlands Español Channel Level Select ‘Crossover Network’ from the Manual SP Setup menuWhen you’re finished, press Return Crossover NetworkSpeaker Distance Listening to the radio Using the tunerUsing the tuner Chapter Saving station presetsListening to station presets Using the tunerNaming station presets Making recordings Chapter Making recordingsMaking an audio or a video recording Operating other Pioneer components Setting the remote to control other componentsControlling the rest of your system Controlling the rest of your system ChapterUse / to select Erase then press Erasing all of the remote control presetsUse / to select Preset then press Use / to select Reset then pressControlling the rest of your system Confirming preset codesDirect function Controlling the rest of your system Controls for TVs Controls for other components HDD Shift JukeboxEnter Guide SubtitleOther connections Chapter Using XM RadioConnecting your XM Radio receiver Other connectionsListening to XM Radio Using XM HD SurroundSaving channel presets Other connectionsConnecting your Sirius Connect Tuner Using Sirius RadioUsing the XM Menu Listening to channel presetsCategory , use Press Sirius SHIFT+AM to switch to the Sirius inputListening to Sirius Radio One at time withParental Lock Use / and Enter to Connecting using HdmiUsing the Sirius Menu Channel Skip/Add Use /About Hdmi Button to select the audio input signalTo the corresponding input source Select ‘Second Zone’ from the ‘Surr Back System’ menu Other connections Second Zone speaker B setupSwitching the speaker system Bi-amping your front speakersConnection is recommended Bi-wiring your speakersUsing a banana plug for the second Make sure that the + / connections are properly insertedDVD player Satellite receiver, etc Using the SR+ mode with a Pioneer plasma displayPioneer plasma DisplayAssigning the digital inputs Other SettingsOther Settings Chapter Input Assign menuOther Setup menu Other SettingsAssigning the Hdmi inputs Dual Mono Setup Dynamic Range Control SetupLFE Attenuator Setup Default setting on SR+ Setup for Pioneer plasma displaysDigital Video Converter Setup Select the ‘PDP Volume Control’ setting you wantAdditional information TroubleshootingAdditional information Chapter Additional information Phase Control featureXM radio messages Switching the speaker impedance Resetting the main unitSirius radio messages Additional information Specifications Miscellaneous Power cord cautionCleaning the unit AM Tuner SectionDecibel Level Example We Want You Listening For a LifetimeTo establish a safe level Once you have established a comfortable sound levelLimited Warranty Pioneer Corporation

VSX-917V specifications

The Pioneer VSX-917V is a sophisticated receiver that stands out in the crowded landscape of home audio systems. Launched as part of the Pioneer VSX series, the VSX-917V embodies a blend of practicality and advanced technology, making it an excellent choice for both movie lovers and music enthusiasts.

One of the main features of the VSX-917V is its impressive power output, delivering a robust 110 watts per channel across a total of seven channels. This ensures that even larger spaces can be filled with rich, immersive sound without distortion. Partnered with the receiver’s Dynamic Range Control, it allows for an optimized audio experience, where both soft whispers and booming action sequences can be enjoyed with equal clarity.

The VSX-917V supports various surround sound formats, including Dolby Digital, Dolby Pro Logic IIx, and DTS. This capability allows users to experience multi-dimensional audio that encapsulates them in their favorite films and games. The receiver also features Pioneer's proprietary MCACC (Multi-Channel Acoustic Calibration System), which automatically calibrates the audio settings based on the acoustics of the room, providing a tailored audio experience for every listener.

Connectivity is another essential aspect of the VSX-917V. The receiver comes with multiple HDMI inputs, capable of handling high-definition video and audio signals, making it compatible with the latest devices such as Blu-ray players and gaming consoles. The HDMI 1.3 port also supports 1080p video upscaling, ensuring that all content played through the receiver is delivered in outstanding quality.

Additionally, the VSX-917V boasts a built-in AM/FM tuner and allows for convenient iPod integration via a direct connection, enabling users to play their favorite digital music seamlessly. The intuitive interface and remote control feature enhance user-friendliness, making system configuration straightforward.

In terms of design, the receiver features a sleek black finish, giving it a modern aesthetic that fits well into any home entertainment setup. The comprehensive menu system makes navigation effortless, allowing users to customize audio settings quickly.

Overall, the Pioneer VSX-917V is a feature-rich receiver that combines power, connectivity, and advanced audio technologies to create a compelling audio experience. With its robust build and user-centric design, it remains a remarkable choice for anyone looking to elevate their home audio system. Whether for casual listening or cinematic evenings, the VSX-917V meets all expectations.
Top Page Image Contents