Pioneer Optimize Your Surround Sound Experience with the VSX-917V Auto MCACC Setup
Page 8

025 minute guide

Automatically setting up for surround sound (MCACC)

The Auto Multi-Channel Acoustic Calibration (MCACC) setup measures the acoustic characteristics of your listening area, taking into account ambient noise, speaker size and distance, and tests for both channel delay and channel level. After you have set up the microphone provided with your system, the receiver uses the information from a series of test tones to optimize the speaker settings and equalization for your particular room.

Important

•The Auto MCACC Setup will overwrite any existing speaker settings you’ve made.

•Make sure the headphones are unplugged.

Caution

•The test tones used in the Auto MCACC Setup are output at high volume.

Make sure there are no obstacles between the speakers and the microphone.

MASTER

VOLUME

MCACC/

AUDIO IN

DOWNUP

If you have a tripod, use it to place the microphone so that it’s about ear level at your normal listening position. Otherwise, place the microphone at ear level using a table or a chair.

3Press RECEIVER on the remote control, then press the SETUP button.

An on-screen display (OSD) appears on your TV. Use /// and ENTER on the remote

control to navigate through the screens and select menu items. Press RETURN to exit the current menu.

•Press SETUP at any time to exit the System Setup menu.1

4Select ‘Auto MCACC’ from the System Setup menu then press ENTER.

SIGNALSEL

System Setup

2. Auto MCACC

RECEIVER

SELECTINPUT

 

SOURCE

AUDIO/VIDEO PRE-PROGRAMMED

 

REMOTE CONTROL UNIT

 

 

F.AUDIO

 

 

 

DVD

TV

DVR

TVCTRL

CD-R/TAPE

XM RADIO

SIRIUS

 

CD FM AM RECEIVER

D.ACCESS +10

CLASS DISC

 

ENTER

TOPMENU

 

 

MENU

 

TUNE

 

 

DTVMENU ST

 

ST

T.EDIT

SETUP

ENTER

RETURN

 

 

GUIDE CATEGORY

TUNE

 

 

 

TV CONTROL

 

TVVOL

INPUT

TVCH

VOL

 

SELECT

 

 

DTVON/OFF

REC

DTVINFO

 

1.Surr

Back System

Surr Back System

 

]

2.Auto

MCACC

 

 

Normal (SB)

3.Manual

MCACC

 

 

 

 

 

4.Manual

SP Setup

 

 

 

 

5.Input

Assign

 

 

 

 

6.Other

Setup

 

 

 

 

 

 

: Exit

ENTER : Start

: Cancel

5 Make sure ‘Normal (SB)’ is selected then press ENTER. 2

1Switch on the receiver and your TV.

2Connect the microphone to the MCACC/ AUDIO IN jack on the front panel.

Try to be as quiet as possible after pressing ENTER. The system outputs a series of test tones to establish the ambient noise level.

Note

1• The screensaver automatically starts after three minutes of inactivity. If you cancel the Auto MCACC Setup at any time, the receiver automatically exits and no settings will be made.

•The OSD will not appear if you have connected using the HDMI output to your TV. Use component, S-video or composite connections for system setup.

2 If you are planning on bi-amping your front speakers, or setting up a separate speaker system in another room, read through Surround back speaker setting on page 35 and make sure to connect your speakers as necessary before continuing.

8

En

Page 7 Page 9
Image 8
Page 7 Page 9
Contents VSX-917V Information to User Federal Communications Commission Declaration of ConformityRisk of Electric Shock Do not Open Contents Other Settings Controlling the rest of your systemOther connections Additional informationBefore you start Before you start ChapterChecking what’s in the box Loading the batteriesMinute guide Minute guide ChapterIntroduction to home theater Listening to Surround SoundAutomatically setting up for surround sound Mcacc 02 5 minute guideMinute guide Follow the instructions on-screenWait for the test tones to finish Make sure ‘OK’ is selected, then pressPress Phase Phase Control to switch on phase correction Better sound using Phase ControlOther problems when using the Auto Mcacc Setup Making cable connections Connecting upConnecting up Chapter Connecting up About the video converter Français Italiano Connecting up Connecting a DVD player and TVEnglish Deutsch Connecting up Connecting the multichannel analog outputsAudio and Video inputs on this receiver.2 Use an optical cable for the connection.4 This receiverConnecting other audio components About the WMA9 Pro decoderEnglish Deutsch Français Italiano Nederlands EspañolConnecting other video components This receiverConnecting to the front panel audio mini jack Using the component video jacksConnecting to the front panel video terminal Connecting up Connecting antennas Using external antennasTo improve FM reception To improve AM receptionEnglish Deutsch Français Italiano Connecting up Connecting the speakersThis receiver Powered Hints on speaker placement Fig. aAC outlet Overhead view of speaker setupView of 7.1 channel speaker setup Front panel Controls and displaysControls and displays Chapter Controls and displays DisplayEnglish Deutsch Français Italiano Nederlands EspañolDigital VIR.SBDirect Auto SurrControls and displays Remote control Deutsch Français ItalianoNumber buttons and other receiver/ component controls RECEIVER TUNE/ST +/- /ENTER TV Control buttonsComponent control buttons Receiver Control buttonsOperating range of remote control Listening to your system Listening to your system ChapterAuto playback Listening in surround soundListening to your system Setting the effect optionsUsing the Advanced surround effects Using Front Stage Surround Advance Using Stream DirectListening in stereo ImagebListening with Acoustic Calibration EQ Using surround back channel processingCustom 1/2 Custom settings Using Midnight and Loudness Using Virtual Surround Back VSBListening to your system Using the Sound Retriever Using the tone controlsChoosing the input signal Enhancing dialogDigital Selects an optical or coaxial digital signal Press F.AUDIO SHIFT+DVD on the remote controlSelecting the front audio inputs Playback the connected componentSystem Setup menu System Setup menu ChapterSurround back speaker setting Select the setting you want to adjustSystem Setup menu Manual Mcacc speaker setupSelect ‘Surr Back System’ from the System Setup menu Select the surround back speaker settingFine Channel Level Fine Speaker DistanceSetting the Acoustic Calibration EQ automatically Select ‘EQ Auto Setting’ from the Manual Mcacc setup menuWait for the Auto Mcacc Setup to finish Acoustic Calibration EQSetting the Acoustic Calibration EQ ManuallyManual speaker setup Checking your Acoustic Calibration EQ settingsFrançais Italiano Nederlands Español Speaker SettingManual SP Setup menu Select ‘Crossover Network’ from the Manual SP Setup menu When you’re finished, press ReturnCrossover Network Channel LevelSpeaker Distance Using the tuner Using the tuner ChapterSaving station presets Listening to the radioNaming station presets Using the tunerListening to station presets Making an audio or a video recording Making recordingsMaking recordings Chapter Setting the remote to control other components Controlling the rest of your systemControlling the rest of your system Chapter Operating other Pioneer componentsErasing all of the remote control presets Use / to select Preset then pressUse / to select Reset then press Use / to select Erase then pressDirect function Confirming preset codesControlling the rest of your system Controlling the rest of your system Controls for TVs Controls for other components Jukebox Enter GuideSubtitle HDD ShiftUsing XM Radio Connecting your XM Radio receiverOther connections Other connections ChapterUsing XM HD Surround Saving channel presetsOther connections Listening to XM RadioUsing Sirius Radio Using the XM MenuListening to channel presets Connecting your Sirius Connect TunerPress Sirius SHIFT+AM to switch to the Sirius input Listening to Sirius RadioOne at time with Category , useConnecting using Hdmi Using the Sirius MenuChannel Skip/Add Use / Parental Lock Use / and Enter toTo the corresponding input source Button to select the audio input signalAbout Hdmi Other connections Second Zone speaker B setup Switching the speaker systemBi-amping your front speakers Select ‘Second Zone’ from the ‘Surr Back System’ menuBi-wiring your speakers Using a banana plug for the secondMake sure that the + / connections are properly inserted Connection is recommendedUsing the SR+ mode with a Pioneer plasma display Pioneer plasmaDisplay DVD player Satellite receiver, etcOther Settings Other Settings ChapterInput Assign menu Assigning the digital inputsAssigning the Hdmi inputs Other SettingsOther Setup menu LFE Attenuator Setup Dynamic Range Control SetupDual Mono Setup SR+ Setup for Pioneer plasma displays Digital Video Converter SetupSelect the ‘PDP Volume Control’ setting you want Default setting onAdditional information Chapter TroubleshootingAdditional information Phase Control feature Additional informationXM radio messages Sirius radio messages Resetting the main unitSwitching the speaker impedance Additional information Specifications Power cord caution Cleaning the unitAM Tuner Section MiscellaneousWe Want You Listening For a Lifetime To establish a safe levelOnce you have established a comfortable sound level Decibel Level ExampleLimited Warranty Pioneer Corporation

VSX-917V specifications

The Pioneer VSX-917V is a sophisticated receiver that stands out in the crowded landscape of home audio systems. Launched as part of the Pioneer VSX series, the VSX-917V embodies a blend of practicality and advanced technology, making it an excellent choice for both movie lovers and music enthusiasts.

One of the main features of the VSX-917V is its impressive power output, delivering a robust 110 watts per channel across a total of seven channels. This ensures that even larger spaces can be filled with rich, immersive sound without distortion. Partnered with the receiver’s Dynamic Range Control, it allows for an optimized audio experience, where both soft whispers and booming action sequences can be enjoyed with equal clarity.

The VSX-917V supports various surround sound formats, including Dolby Digital, Dolby Pro Logic IIx, and DTS. This capability allows users to experience multi-dimensional audio that encapsulates them in their favorite films and games. The receiver also features Pioneer's proprietary MCACC (Multi-Channel Acoustic Calibration System), which automatically calibrates the audio settings based on the acoustics of the room, providing a tailored audio experience for every listener.

Connectivity is another essential aspect of the VSX-917V. The receiver comes with multiple HDMI inputs, capable of handling high-definition video and audio signals, making it compatible with the latest devices such as Blu-ray players and gaming consoles. The HDMI 1.3 port also supports 1080p video upscaling, ensuring that all content played through the receiver is delivered in outstanding quality.

Additionally, the VSX-917V boasts a built-in AM/FM tuner and allows for convenient iPod integration via a direct connection, enabling users to play their favorite digital music seamlessly. The intuitive interface and remote control feature enhance user-friendliness, making system configuration straightforward.

In terms of design, the receiver features a sleek black finish, giving it a modern aesthetic that fits well into any home entertainment setup. The comprehensive menu system makes navigation effortless, allowing users to customize audio settings quickly.

Overall, the Pioneer VSX-917V is a feature-rich receiver that combines power, connectivity, and advanced audio technologies to create a compelling audio experience. With its robust build and user-centric design, it remains a remarkable choice for anyone looking to elevate their home audio system. Whether for casual listening or cinematic evenings, the VSX-917V meets all expectations.
Top Page Image Contents