Samsung SSC-21 installation manual Mounting BRACKETSBR-120

4) MOUNTING BRACKET(SBR-120)

!Overview

MOUNTING BRACKET (SBR-120) is used to install camera housing to a wall.

@Installation

•Choose an installation site that can sufficiently support the weight of the equipments to be installed.

•Mark the mounting holes using the house mount bracket as a template, then drill pilot holes (8 mm diameter, 45 mm depth), and then install and secure the plastic anchors. At this time, cut away all exposed protrusions.

•Align the housing mount bracket over the plastic anchor holes, then firmly fasten the tapping screws.

•Install the housing according to the following CAMERA HOUSING installation method.

#Specification

Use : Indoor

Installation : Wall

Dimensions	: 75 ✕ 115 ✕ 240(W ✕ H ✕ D)
Weight	: 500g
Operating Temperature : -10 °C ~ 50 °C
$ Accessories
Hexagon Socket Head Cap Screws ----------		2
L- WRENCH ------------------------------------		1
SCREW ------------------------------------------		4
Plastic Anchor -----------------------------------		4
Tapping Screw(M5 ✕ J5) ----------------------		4

14