Alarm & Buzzer Setup, Video Adjustment Setup, Save

5.ALARM & BUZZER Setup

•Use this to select audio output channel for alarm and video loss occurrence while in the System operation Setup and Quad modes.

•	Use the ▲	▼ keys	ˇ	ˆ	to set
	the Alarm Hold Time Setting Mode. Alarm
	Hold Time can be between 0 to 30 minutes; 59
	seconds.When more than one Alarm occurs,
	Alarm hold time goes comes into effect in the
	order of the Alarm occurrence.
•	Use the ▲	▼ keys	ˇ	ˆ	to set

ALARM and LOSS to either ON or OFF.

•If ON is selected, Channel Audio will be muted and buzzer will sound in the event of alarm trigger or video loss.

• Use the ▲ ▼ keys ˇ	ˆ to select the desired channel for Audio output during
Quad Mode.

•Press the ENTER key, all the adjustments are stored in the memory and the display returns to the Main Menu screen.

•Use to set up items concerning video signals such as CONTRAST, BRIGHT, etc.


• Select the item to change, ▲		▼ then use the
ˇ	ˆ keys to change the numerical value.

A numerical value can range from 0 to 100.

• "EXIT" will allow you to choose whether to save the changed data.

"SAVE"	: Saves the changes
"PRESET": Resets all the setting to factory
	preset.
"QUIT"	: Exits the setup mode without saving.

•Press the ENTER key, all the adjustments will be stored in the memory and the will display returns to the Main Menu screen.

✳Preset values of all setting CONTRAST : 80 BRIGHT : 50

COLOR : 50

TINT : 50

SHARP : 50