Bank ‘File’ containing the current 8 Registrations that are stored to the 8 ‘REGISTRATION MEMORY’ buttons.
9)Use the [1] - [8] toggle buttons under the screen to name the Registration Bank ‘File’.
10)Press the [8 ^] 'OK' button to save the Registration Bank ‘File’ into the chosen memory location.
11)To name the 8 individual Registrations contained in the Registration Bank ‘File’, do the following:
a)Press the [8 ^] 'EDIT' button.
b)Press the [1 v] 'NAME' button.
c)Use the [A] - [D] and [F] - [I] buttons to select the desired Registration.
d)Press the [7 v] 'OK' button.
e)Use the [1] - [8] toggle buttons under the screen to name the Registration.
f)Press the [8 ^] 'OK' button to store the name.
g)Press the [8 v] button to return to the 'REGISTRATION BANK' screen.
h)Press the [EXIT] button repeatedly to return to the 'MAIN' screen.
Loading Registrations:
NOTE: The ‘REGISTRATION MEMORY’ button settings are cleared whenever the unit is turned OFF. To load Registrations back in after the unit has been turned ON (or to select a different Registration Bank), the following procedure must be performed.
1)Press the [J] 'REGISTRATION BANK' button.
2)Use the [BACK] and [NEXT] buttons to select a memory location ('USER' or 'FLOPPY DISK') containing the desired Registration Bank ‘File’.
3)Select the desired Registration Bank ‘File’:
a)If Folders were first created, use the [A] - [J] buttons to select the desired Folder, then the desired Registration Bank ‘File’.
b)If Folders were not created, use the [A] - [J] buttons to directly select