To duplicate entire disks, the ‘DISK TO DISK COPY’ feature may be used:
1)Insert the 'source' floppy disk containing the files to be copied.
2)Press the [FUNCTION] button.
3)Press the [I] ‘UTILITY’ button.
4)Use the [BACK] and [NEXT] buttons to select the ‘DISK’ page in the screen.
5)Press the [F] ‘DISK TO DISK COPY’ button.
6)Press the [G] ‘OK’ button.
7)When prompted on the screen, insert the destination disk.
8)Press the [G] ‘OK’ button. When the screen displays ‘Completed’, the process is finished.
NOTE: If there is a large amount of data on the disk, the screen may display a message asking for the source disk again, followed by a repeat of the procedures in steps 5 – 7.
Owner's Manual, p. 43, 150