Connecting Your Balanced Stereo Audio Distributor
I:G c | D CQH u | da |
To configure a 2x1:5 stereo DA, as illustrated in Figure 5, do the following:
1.Connect a stereo audio source (for example, a stereo audio player A) to LEFT and RIGHT INPUT A.
2.Connect up to 5 stereo audio acceptors (for example, mono audio recorders 1A to 5A) to any of the LEFT and RIGHT A OUTPUT connectors.
3.Connect a stereo audio source (for example, a stereo audio player B) to LEFT and RIGHT INPUT B.
4.Connect up to 5 stereo audio acceptors (for example, mono audio recorders 1B to 5B) to any of the LEFT and RIGHT B OUTPUT connectors.
5.Push IN the LEFT and RIGHT selector buttons 1:10/2x1:5 to select 2x1:5.
6.Connect the power cord to the electricity supply.
7.Switch on the oe7??A:.
The audio input(s) is/are distributed to the audio outputs.
Figure 5: 2x1:5 Stereo DA Configuration
10 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |