Connecting Your Balanced Stereo Audio Distributor
I:C c | CQDB n da |
To configure a 1:20 mono DA, as illustrated in Figure 2, do the following:
1.Connect a source (for example, an audio player1) to LEFT INPUT A and
RIGHT INPUT A.
2.Connect up to 20 mono audio acceptors (for example, mono audio recorders) to any of the OUTPUT connectors.
3.Release the LEFT and RIGHT selector buttons 1:10/2x1:5 to select 1:10.
4.Connect the power cord to the electricity supply.
5.Switch on the oe7??A:.
The audio input(s) is/are distributed to the audio outputs.
Figure 2: 1:20 Mono DA Configuration
1 With 2 identical outputs, or via a 1:2 splitter
7