Fostex FM-3 owner manual Precautions, Do not install the unit in the following conditions

Page 4

Precautions

Precautions before using

Do not supply the voltage that does not match the voltage requirement of the unit.

If you operate the unit on battery power, use alkaline or nickel hydride batteries.

If you supply the power to the unit from theAC power outlet, only use the optional dedicated FostexAC adaptor.

If you use any otherAC adaptor, the unit may not work correctly and there is a serious risk of damage to the unit.

If you wish to use the unit in a country where the voltage of theAC power outlet does not match your AC adaptor, ask your local Fostex dealer or service station for purchasing an appropriateAC adaptor. Note that theAC adaptor can be used both in 50 Hz and 60 Hz areas.

Do not let water or other liquid, or metal objects such as pins, accidentally enter the inside of the unit. Should water enter the inside of the unit, turn off the power, unplug theAC adaptor and remove batteries, and consult your dealer or the nearest FOSTEX service station.

Do not drop the unit or give it a strong shock. The internal circuits, display or panels may be damaged.

To prevent possible electric shock and damage to the unit, do not remove the cover or reach the inside of the unit.

<Important!>

Equipment name, electrical ratings, serial number and other information for the FM-3, are written on bottom side.

Precautions on installation

Do not install the unit in the following conditions.

*In an extremely hot or cold place

*In a moist place

*In a strong magnetic field or near a device which generates a magnetic field

*In the direct rain or water

<Note>: The unit is designed for outdoor use, howev- er, it is not waterproof. Do not use the unit in the direct water.

Notes on moisture condensation

When you bring the unit from a cold place to a warm place, moisture may condense on the display, pan- els, etc. In such a case, turn off the power and leave the unit for a while until it warms up and evaporates any moisture.

4

Image 4
Contents Table of contents Model FM-3Safety Instructions Appliance has been dropped, or the enclosure damagedImportant Safety Instructions Precautions Do not install the unit in the following conditionsMain features Mixer section featuresPreparation of power supply Battery box compartmentBattery box compartment Symbol Basic operationsPreparation of input channels Preparation of output channelsPreparation of metering Set the pan and HPF switches of each channel if required Input setting Master fader reference settingPreparation of monitoring Block diagram Names and functions Front panel sectionMonitor select switch Headphones level controlLimiter switch ON, OFF, Link Factory preset valuesLeft side panel section Right side panel section Adjusting the display brightness DisplayYou can select from OFF and 1 through Key darkerSelecting the meter mode Press the + or key to select the desired meter modePress the Edit key to exit the status display mode Selecting the status displayMicrophone power supply switch status Input select switch statusHPF switch status To ST Buss switch statusLimiter switch status AUX OUT switch statusAUX OUT level switch SUB OUT level switch Main OUT L, R level switchesLong enough to stop flashing Limiter parameter settingValues Parameter setting procedure Meter status display+ or key Peak meter on/offSystem status display Initializing the flash memorySpecifications Inputs/OutputsPerformance OthersGeneral External dimensions Declaration of EC Directive Affect of Immunity on This EquipmentFor the US Customers only Fostex America Limited Warranty Fostexco