2.11 Printer port Connector (CN4)
Normally, the printer port is used to connect the card to a printer. The
The printer port is designated as LPT1, and can be disabled or changed to LPT2 or LPT3 in the system BIOS setup.
The printer port interrupt channel is designated to be IRQ7. You can select ECP/EPP DMA channel via BIOS setup.
2.12 CompactFlash Socket
The
2.12.1 CompactFlash (CN22)
The CompactFlash card occupies a secondary IDE channel which can be enabled/disabled via the BIOS settings.
15 | Chapter 2 Installation |