American DJ 4Play General Operation, Fuse Replacement, Lamp Replacement, Fixture Cleaning

Page 2

4-Play™ Basic Operation

General Operation:

This fixture is designed to operate as a stand alone unit, there is no need of a controller. It has been tested and lamped at the factory there is no assembly necessary. The 4-Play™ is ready to be plugged in and used right out of the box. There is no power switch, after plugging the unit if there is no lamp output check the fuse and bulb. Sometimes the lamp becomes loose during shipping and transit. If lamp does not turn on after you plug the unit in, open the lamp cover to be sure the lamp is seated properly. If the fuse and bulb are good, please call our customer support line for further instructions.

After plugging the 4-Play™ in, the unit will produce multiple colored beams that rotate in a circular motion. The four dichoric mirrors of the 4-Play™ can be adjusted, to optimize area coverage. The 4-Play™ will react to low frequencies of music via an internal microphone. This fixture features a light weight case design and a hanging bracket. This fixture is designed for mobile DJ’s, clubs, bands, roller rinks and any arena that requires a compact, light weight, easy to use fixture.

Be sure not to obstruct cooling vents and keep in a well ventilated area. For best results, use fog or special effects smoke to see the beams of light.

4-Play™ Fuse & Lamp Replacement

Caution: Always replace with the exact same type lamp and fuse, unless otherwise specified by an authorized American DJ® technician.

Fuse Replacement:

Disconnect the unit’s main power supply. Find the fuse holder located on the rear of the, next to the power cord. Insert a standard flat head screw driver in to the fuse holder housing. Turn the screwdriver in counter-clockwise direction to remove the fuse holder. Remove the old fuse and discard it, replace the fuse with the same type. Insert the fuse holder with the new fuse back into it’s housing.

If you continue to blow fuses, STOP using the unit. Return the unit for servicing. Continuing to use the unit may cause serious damage.

4-Play™ Fuse & Lamp Replacement Cont.

Lamp Replacement:

Disconnect the unit’s main power supply. Located the lamp cover on the front of the unit. Remove the thumb screw that retains the lamp cover and remove the lamp cover. Remove the old lamp and replace with a new one. Be sure to follow all the lamp handling instructions that are included with the new lamp. Reassemble in reverse order.

Caution: Never touch a new lamp with your bare fingers. If you continue to blow lamps, STOP using the unit. Return the unit for servicing. Continuing to use the unit may cause serious damage.

4-Play™ Cleaning

Fixture Cleaning:

Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried out periodically to optimize light output.

1.Use normal glass cleaner and a soft cloth to wipe down the outside casing.

2.Use a brush to wipe down the fan grill.

3.Clean the external optics with glass cleaner and a soft cloth every 20 days.

4.Clean the internal optics with glass cleaner and a soft cloth every 30-60 days.

5.Always be sure to dry all parts completely before plugging the unit back in.

Cleaning frequency depends on the environment in which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy club use we recommend cleaning on a monthly basis. Periodic cleaning will ensure longevity, and crisp output.

©American DJ Supply® - www.americandj.com - 4-Play™ Instruction Manual Page 3

©American DJ Supply® - www.americandj.com - 4-Play™ Instruction Manual Page 4

Image 2
Contents Customer Support User Instructions American DJIntroduction Fixture Cleaning Fuse ReplacementLamp Replacement General OperationTechnical Specifications Model 4-Play

4Play specifications

The American DJ 4Play is an innovative lighting fixture designed to enhance any DJ performance or event. This versatile unit combines advanced technology with user-friendly features to create dynamic and captivating light displays. DJs, clubs, and event planners alike appreciate the 4Play for its ability to seamlessly integrate into a variety of setups and its impressive array of lighting capabilities.

One of the main features of the 4Play is its compact and lightweight design, making it easy to transport and set up. Weighing in at just under 10 pounds, this fixture can be positioned anywhere needed without cumbersome equipment. Its four independently adjustable heads allow for a wide range of movement and flexibility, enabling users to create unique light shows that can adapt to different environments.

At the heart of the 4Play is its extensive LED technology. The unit is equipped with high-output RGB LEDs that deliver vibrant colors and brightness, ensuring that every performance leaves a lasting impression. The mix of colors generated offers a spectrum that enhances both the atmosphere and mood of any event. Additionally, the LEDs have a long lifespan, making the 4Play an economical choice for long-term use.

The 4Play offers various operational modes, including sound activation, automatic programs, and DMX control. The sound activation mode allows the lights to sync with music, thus creating an energetic light show that responds to the beat. For those looking to exert more control, the DMX control mode provides the ability to program and customize light sequences via professional lighting software. This capability makes it ideal for larger events where precise timing and coordination with other lighting equipment are essential.

Another noteworthy characteristic is the built-in strobe effect, which adds an extra layer of excitement to performances. The adjustable strobe speed lets users create intense bursts of light that amplify the energy of the setting.

The 4Play also features power linking capability, which allows multiple units to be connected together for synchronized shows without the need for additional power outlets. This feature simplifies setup in larger venues where multiple lights may be needed.

Overall, the American DJ 4Play stands out as a powerful and flexible lighting solution suitable for a variety of applications. Its blend of portability, advanced LED technology, and programmable features make it an essential tool for any DJ looking to elevate their lighting game and create unforgettable experiences. With the 4Play, lighting is not just an accessory but a pivotal part of the performance itself.