FUNCTIONS & CONTROLS CONT.
A.DRIVE TRANSPORT (Figures 1 & 2)
1)POWER (Power On/Off Button) - When the POWER Button is pressed, the power turns on, press again to turn power off.
2)PLAYER 1 TRANSPORT TRAY- Place the a compact discs in this tray.
3)PLAYER 1 OPEN/CLOSE BUTTON - Press it to open and close the player one’s transport tray. The disc tray cannot be opened during playback, so stop playback before pressing these buttons.
4)PLAYER 2 OPEN/CLOSE BUTTON - Press it to open and close the player one’s transport tray. The disc tray cannot be opened during playback, so stop playback before pressing these buttons.
5)PLAYER 2 TRANSPORT TRAY- Place the a compact discs in this tray.
6)PLAYER 2 REMOTE CONTROL CONNECTOR - Connect this connector to the remote unit using the included control cord.
7)PLAYER 2 DIGITAL OUTPUT (RCA TYPE - SPDIF) Connect to a DAT or CDR to make almost perfect copies of your CDs.
8)PLAYER 2 RCA LINE OUT - Player 2 audio signal output.
9)VOLTAGE OUTPUT SELECTOR - This selects between an incoming voltage 115v or 220v. Be sure the switch is in the proper position for your area.
10)POWER CONNECTION - Plug in to a standard wall outlet, to feed power to your unit.
11)PLAYER 1 REMOTE CONTROL CONNECTOR - Connect this connector to the remote unit using the included control cord.
12)PLAYER 1 DIGITAL OUTPUT (RCA TYPE - SPDIF) Connect to a DAT or CDR to make almost perfect copies of your CDs.
13)PLAYER 1 RCA LINE OUT - Player 1 audio signal output.
B.Control Unit (Figures 3 & 4)
1)OPEN/CLOSE BUTTON - Press it to open and close the disc trays. The control unit also includes OPEN/CLOSE buttons. The disc holders cannot be opened during playback, so stop play- back before pressing these buttons.
2)LCD DISPLAY - This high quality LCD display Indicates all the functions, as they are occurring. This display is viewable at several comfortable angles. The display ICONS will be explained in the next section.
3)
Remember, that this is a momentary function when you remove your finger from the pitch bend button the BPM's will automatically return to SLIDERS (5) selected pitch.
4)(+) PITCH BEND Button - The (+) pitch bend function allows a momentary “BUMP” in the CD’s BPM’s (Beats per minute) while it is playing. This will allow you to match the beats between two playing CD’s or any other playing music source. Remember, that this is a momentary function when you remove your finger from the pitch bend button the BPM's will automatically return to SLIDERS (5) selected pitch. Use this function to catch up to your other playing music source.
5)PITCH SLIDER - Use the slider to adjust the BPM. Slide up to decrease the BPM, down to increase the BPM.
6)TIME BUTTON - Press this button to switch the time display between the elapsed time and re- maining time, and total remain time. The selected mode is indicated by the ELAPSED, REMAIN and TOTAL REMAIN indicator on the LCD.
7)SGL/CTN (Single/Continuous Button) - Press it to switch between the single and continuous play modes. The SINGLE mode is indicated by the SINGLE indicator on the LCD.
8)PROGRAM BUTTON - Press the PROGRAM button, the player will enter the program mode and stop the CD playback.
9)LOOP BUTTON - Press the LOOP button to set the loop start point, press the LOOP button again to set the loop end point.
10)PITCH BUTTON - Use these buttons to enable or disable BPM adjustment with the pitch sliders. BPM adjustment with the pitch sliders is enabled when the PITCH LED lights.
11)PLAY/PAUSE BUTTON - Use this button to start playback. Press once to start playback, once again to set the pause mode, and once more to resume playback.
12)CUE BUTTON - Press the CUE button during playback to return to the position at which playback started.
13)PITCH LED INDICATOR - This red LED will glow when the pitch function has been activated.
14)BACK SKIP BUTTON - Use this button to go back to the beginning of the current track or select a previous track for playing.
15)REVERSE SEARCH/SCAN BUTTON - Press this button to perform a reverse frame search during pause mode or to perform a reverse scan function during play.
16)FORWARD SEARCH/SCAN BUTTON - Press this button to perform a forward frame search during when in pause or to perform a forward scan during play.
American DJ® AUDIO •