American DJ the Max warranty Lens Focusing, DMX512 Operation, DMX-512 Addressing

Lens Focusing

1.Hang fixture in its final position

2.If no controller is used set Function DIP switch 10 to on and turn sensitivity to minimum.

3.Projector shutter will open and Pan and Tilt will be set to center and a Gobo will be selected.

4.Lightly tap on mic until desired position is achieved.

5.Adjust lens until sharp focus is obtained.

.

Section 2

DMX512 Operation

I. Connect The MAX™ fixture to a DMX Controller with a minimum 8 channels.

2.Continue to connect together all the fixtures using 3 pin XLR data cables.

3.Set the DMX address for each fixture using the 9 pin DIP switch on the side control panel. Each fixture uses 8 DMX-512 channels;

CH1: Pan, CH2: Tilt, CH3: Pan Speed, CH4: Tilt Speed,

CH5: Special Pan and Tilt Control, CH6: Color, CH7: Gobo, CH8: Shutter

DMX-512 Addressing

You must select the proper DMX-512 address for each MAX™ projector. Follow the settings on the side of the base of The MAX™

On The Following pages you will see the approximate values required to control the various func- tions of The Max™

CHANNEL	DESCRIPTION		VALUES
1) PAN	PAN (BASE)		0-255
2) TILT	TILT (HEAD)		0-255
3) PAN SPEED	PAN SPEED (SLOW> FAST)		0-255
4) TILT SPEED	TILT SPEED (SLOW> FAST)		0-255
5) SPECIAL	PAN	TILT
	MIN	MIN	0-15
	MIN	MAX	16-31
	MAX	MIN	32-47
	MAX	MAX	48-63
	CONTINOUS(COUNTER	MIN	64-79
	CLOCKWISE)
	CONTINOUS(COUNTER	MAX	80-95
	CLOCKWISE)
	CONTINOUS	MIN	96-111
	(CLOCKWISE)
	CONTINOUS	MAX	112-127
	(CLOCKWISE)	CONTINOUS(COUNTER
	MIN		128-143
		CLOCKWISE)
	MAX	CONTINOUS(COUNTER	144-159
	MIN	CLOCKWISE)	160-175
		CONTINOUS
	MAX	(CLOCKWISE)	176-191
		CONTINOUS
		(CLOCKWISE)
	CONTINOUS(COUNTER	CONTINOUS(COUNTER	192-207
	CLOCKWISE)	CLOCKWISE)	208-223
	CONTINOUS	CONTINOUS(COUNTER
	(CLOCKWISE)	CLOCKWISE)
	CONTINOUS(COUNTER	CONTINOUS	224-239
	CLOCKWISE)	(CLOCKWISE)
	CONTINOUS	CONTINOUS	240-254
	(CLOCKWISE)	(CLOCKWISE)
	RESET ALL FUNCTIONS		255

© American DJ® Los Angeles, CA 90058 USA The MAX™ User Instructions page 3