1. STARTING UP
STEP ONE
Connect the AC/DC adaptor to the DC POWER JACK found on the rear of the unit. Fasten the SECURITY CLAMP (found beside the DC power jack) on top of the cable by unscrewing the fastener and then screwing it back down on the cable, so that it is not possible for the cable to become dislodged.
DC Power Jack
Security Clamp
STEP TWO
Connect either the 1/4” type (Balanced) audio output and/or the RCA type (Unbalanced) AUDIO OUTPUTS to a power amplifier, set of powered speakers or mixer (see diagram below). The SCS.4DJ features balanced and unbalanced connectors to connect to a wide variety of audio equipment, and both outputs can be used simultaneously.
RCA Outputs | 1/4” Jack TRS Outputs |
(UNBALANCED) | (BALANCED) |
11