Stanton SCS.4DJ Step Three, Step Four, USB Port 1 top right of unit USB Port 2 rear of unit

STEP THREE

Connect your primary USB device to one of the USB 2.0 PORTS located on the SCS.4DJ (top, rear or bottom of unit beneath the door). You may use any driverless USB device that has a FAT32, NTFS, or HFS+ (non-journaled only) file system. For just starting out, it may make sense to place only a few songs on a USB drive or use the included demo material so you don’t have to wait long for drive analysis (where SCS.4DJ calculates your song information, including BPM and Waveform) to be completed to start playing. You may also connect a USB keyboard, as well as a powered (active) USB hub to augment the amount of available ports, giving you the advantage of connecting more USB storage devices.

USB Port 1 (top right of unit)

USB Port 2 (rear of unit)

STEP FOUR

Press the POWER BUTTON located to the right of the rear panel. The unit will take about 45 seconds to boot up, and will start the process of detecting and analyzing the content located on any USB devices that are currently connected. When the Song Analysis symbol disappears, then your songs are analyzed and you can take full advantage of the SCS.4DJ feature set.

Power Button

Song Analysis Symbol

Now, let’s take a brief tour of the SCS.4DJ’s controls and connections.

12