Stanton SA.5 C H N I C a L S P E C I F I C AT I O N S, P L a C E M E N T PA RT S, Thd+N

T E C H N I C A L S P E C I F I C AT I O N S

Line input:	2	(RCA) x 2 channels, -10 dBV / 10 kOhm
Session Input:	2	(RCA), -10 dBV / 10 kOhm
Phono input:	2	(RCA) x 2 channels, -50 dBV / 47 kOhm
Mic input:	1(1/4") -50 dBV / 2.4 kOhm balanced
Master output:	2	(1/4”) Balanced / 2 (RCA) unbalanced,
	+4 dBu balanced / -10 dBV unbalanced
Record output:	2	(RCA), -10 dBV / < 100 Ohms
Headphone output:	2	(1/4 inch), 1 (1/8 inch)
	Greater than 32 Ohm load
Frequency Response (Line):	20 Hz to 20 kHz +/-1 dB
THD+N:	< 0.015 % at 1 kHz
Signal to Noise Ratio
(ref: max level):	> 110 dB (main signal path)
Noise:	< -92 dBV (Line input to any output)
Channel EQ:	Hi		+9, -45 dB, (Kill)
	Mid		+9, -35 dB, (Kill)
	Low +9, -55 dB, (Kill)
Crosstalk:	< -90 dB at 1 kHz
Channel and Crossfader Kill:	< -100 dB
Dimension (LxWxD):	17.5 in x 14.2 in x 4.3 in
	(44.5 cm x 36 cm x 11 cm)
Weight:	8.6 lbs (3.9 kg)

R E P L A C E M E N T PA RT S

To replace the cross or channel faders, follow steps 1 and 2 of the cleaning instructions. The following replacement parts are available from Stanton or your local Stanton dealer.

CF-PG110	Penny & Giles crossfader/ line fader
OS2	Optical Scratch Switch (phono/line selector)
PS-16US	US Power Supply (110v)
PS-16EU	European Power Supply (220v)
PS-16UK	UK only Power Supply (240v)