Stanton SA.5 owner manual C K Pa N E L, O N T Pa N E L

B A C K PA N E L

28.Headphone output: Standard 1/4” headphone output connector.

29.Session/Mic switch: Used to assign the Session/Mic fader to either the Session input or the MIC input.

30.Microphone input: 1/4” connector for connecting a microphone.

31.Phono Inputs: Phono level inputs for channels 1 and 2. Do not plug line outputs into phono inputs.

32.Line inputs: Line level inputs for channels 1 and 2.

F R O N T PA N E L

34 34 34

33 35 36 35 37

33.Headphone output: Standard 1/8” (mini jack) headphone output connector.

34.Reverse indicator LEDs: The LEDs indicate the status of the fader reverse functions. The respective LED lights up when a fader is reversed.

35.Line fader curve switch: Three-position switch selects between a sharp, mid and long fade for the corresponding line fader.

36.Cross fader curve switch: Three-position switch selects between a sharp, mid and long fade for the crossfader.

37.Headphone output: Standard 1/4” headphone output connector.