BACK PANEL
20
19
22 23 25 26 25 26 27
28
29
30
21 | 24 | 31 | 32 | 31 | 32 |
19.AC IN: Input connection for the included power supply.
20.Power switch: Turns the mixer on or off.
21.Balanced Master output: TRS balanced (1/4”) connectors are typically used to connect to a P.A. mixer or an amplifier for live performances or a recording console for recording.
22.Unbalanced Master output: RCA connectors are typically used to connect to a home stereo or to another mixer with RCA inputs for practicing or team routines. Several SA.5’s can be daisy chained from this output via the session input (25).
23.Master Trim: Controls the sensitivity of the Master output. Great when an additional boost or cut is needed.
24.REC: The record output is not affected by the Master volume control. It can be used to record to a computer, CD, MD, & tape recorder, even while the master volume is turned down.
25.Phono Trim: Used to adjust the gain of the phono
26.Ground connector: Connects to the turntable ground connector to eliminate electrical hum. Ground cables are usually supplied with turnta- bles. Some newer turntables such as the Stanton STR8.150 do not require a ground cable because they are grounded internally.
27.Session Input: This extra line level input is controlled by the session level fader (1) when the Session/Mic switch (27) is switched to session (the up position). It can be used as an extra line input or as a session input for team routines.