Master Panel Descriptions and Functions

Master Panel

Descriptions and Functions

LEFT

-38 -30 -20 -10 -7 -4 -2 0 +2 +4 +7 +10

RIGHT

OUTPUT LEVEL DISPLAY

	5		5	5
		4	5
0	10		0	10
A/V OUT LEVEL			POWER AMP LEVEL
+12	+12	+12	+12	+12

-12	-12	-12	-12	-12
60	60	1K	4K	12K
8		7		CUE
	MASTER EQUALIZER			9
	MASTER EQUALIZER
ON				ON
				KEY

MASTER/L

MASTER/R

BOOTH

LIGHT

(DC 12V)

(BNC)

POWER

HEADPHONES

010

PHONES LEVEL

010

REPEAT

010

DELAY

010

DIGITAL ECHO

1.LED METERS - These meters display system OUTPUT LEVELS. For maximum performance with a clean, undistorted signal, increase source out- put, as well as the PKJ-9090PRO’s GAIN, CHAN- NEL FADER and L/R MASTER FADERS until meter peaks in the yellow LED range (-2 to +4). Input should rarely cause meters to peak in the range of the red LEDs for best sound.

2.12V LIGHT JACK (BNC) - This BNC style jack is for connecting a 12V DJ LIGHT, ideal for mixing in dark environments.

3.POWER - This button turns the PKJ-9090PRO ON in the upper position and OFF in the lower posi- tion.

4.AV OUT LEVEL control - This level control only affects the RCA jacks from AV OUT on the back panel. MASTER and CHANNEL faders will not effect ouput levels from these jacks.

5.POWER AMP LEVEL control - This level control affects the audio output volume from the PKJ- 9090’s power amp. If you are not using the power amp’s outputs this control will not adjust the vol- ume.

6.HEADPHONES jack - This ¼” jack is for con- necting HEADPHONES.

7.MASTER EQUALIZER - This 5-band, Graphic EQ gives you additional control over your tone in the

60Hz, 250 Hz, 1KHz, 4Khz and 12KHz frequen- cies with a +/- 12 boost or cut for precise room tuning. Adjust these controls to suit your sound quality preferences.

8.MASTER EQUALIZER ON/OFF - This button must be pressed in to activate the Graphic EQ.

9.CUE/MASTER - This button toggles between CHANNEL Cueing and MASTER Cueing. When CHANNEL cueing, you will only hear channels that have been selected for Cueing. When MASTER Cueing, you will hear MASTER OUTPUT, regardless of which channels have been selected for Cueing. Note: Digital Key Control changes are only audible when MASTER Cueing.