VocoPro PKJ-9090PRO owner manual Stereo Input Microphone Inserts

Rear Panel (Mixer) Descriptions

and Functions Cont...

9.MICROPHONE INSERTS - These jacks are for connecting out-board effects units. The audio from the MIC channels are routed out from the INSERT jacks to your out-board effects unit(s) and routed back with the effects applied, using only a single cable. In order to use these jacks, you will need appropriate TRS (tip = send, ring = return, sleeve = signal ground) insert cables.

10.GROUND TERMINALS - These TERMINALS are for connecting ground wires. If you are experiencing line noise, attach wire from here to your other devices or similar suitable surface.

11.VIDEO OUT 1, 2, 3 - These jacks send graphics from input source player video output to video display device(s) such as TVs, TFTs and Monitors. Connect video cables from these VIDEO OUT jacks to the VIDEO IN jacks on your video display device(s).

12.VIDEO IN 1, 2, 3 - These jacks allow the video component of CD+G, DVD, VCD and LD players to be connected to the PKJ-9090PRO. Connect video cables from the VIDEO OUT jacks on your player(s) to these VIDEO IN jacks.

13.REMOTE KEY CONTROL - This 1/8” jack is for connecting a REMOTE KEY CONTROL cable. Remote Key Control allows you to make key changes at a distance from the Digital Key Controller on the PKJ- 9090PRO.

14.CD INPUT 1, 2, 3 - Use these dedicated inputs for CD players as source music with RCA L/R cables. Adjust the STEREO CHANNEL SOURCE toggle on the middle panel of the PKJ-9090PRO accordingly.

14

BOOTH OUT

MASTER OUT

REC OUT

AV OUT

AV INPUT

STEREO INPUT

MICROPHONE INSERTS

UNBAL RECORD

AUDIO

AV3 AV2

AV1 PHONO 3

CD 3

PHONO 2

CD 2

PHONO 1

CD 1

9

LINE

LINE

4

3

2

1

Balanced

10

remote

PHONO

key control

GND

VIDEO OUT

VIDEO IN

13

LINE

11

12

++

--

15