VocoPro PKJ-9090PRO owner manual Bridge Operation, Stereo Operation

Page 22

Advanced Operations Cont...

Bridge Operation

1.Set the STEREO/BRIDGE switch to the BRIDGE position.

2.With the PKJ-9090’s power OFF, connect the banana plug cables from the speaker’s output to the STEREO.BRIDGE input horizontally. When using the bridge connection, only one cable can be used.

( - ) ( + )

(- ) ( + ) Banana plug

STEREO AND BRIDGE OUTPUT CONFIGURATIONS

Stereo Operation

1.Set the STEREO/BRIDGE switch to the STEREO position.

2.With the PKJ-9090’s power OFF, connect the banana plug cables from the speaker’s output to the STE- REO/BRIDGE input vertically with the left speaker plugged in to the L side and the right speaker plugged into the R side. See the ﬁgure below.

TO SPEAKER

INPUT

Mono Bridged

++

--

Stereo

TO SPEAKER	TO SPEAKER
INPUT	INPUT
+	+
-	-

21

Image 22

Contents PKJ-9090PRO Safety Instructions FCC Information U.S.A Listening For a Lifetime Table of Contents Speciﬁcations Welcome… Mounting Signal Path Getting ConnectedMicrophone Panel Descriptions and Functions Middle Panel Descriptions and Functions Vocal PARTNER/MULTIPLEX Function & Vocal ElminatorCROSSFADER/VIDEO Toggle EY Control and Crossfader Video ToggleMaster Panel Descriptions and Functions Output Level Display Rear Panel Mixer Descriptions Functions AV Input Stereo Input Microphone InsertsStereo Input Microphone Inserts Rear Panel Amp Descriptions Functions Assigning Digital Key Control to MIC and Stereo Channels Using Digital Key ControlAdvanced Operations Remote Key Controlling of assigned Stereo and MIC inputsCustomizing Digital Echo settings See Figure Digital EchoMaking an announcement during playback Fine tuning music for precise room tuningChannel Cueing Crossfading between sources Master CueingRecording a Performance or Mix Bridge Operation Stereo OperationTroubleshooting Vocopro