Hookup Diagrams
Public Address/Presentation
For this set up, there are four microphones connected to channels 1-4. These microphones can be either the optional UHF wireless channels, low-impedance corded microphones, or high-impedance corded microphones. Source music devices are connected to channels 5-8. Note that when connecting stereo source music devices to either CH. 5/6 or CH. 7/8, you can either connect via 1/8” mini-jack, RCA or L/R ¼”. If connecting mono source audio devices, connect them the CH. 5-8 via the ¼” jacks. Note that CH. 5/6 and 7/8 will be controlled together by the channel strips. If connecting a single mono signal to either CH. 5/6 or CH. 7/8, connect to the L(MONO) jack.
For power output, this example shows PA-PRO 900 confi gured for MAIN L/R+MONITOR output. A pair of passive speakers is powered by the MAIN L./R speaker connector. A passive monitor speaker is powered by the MONITOR speaker connector. An additional set of powered speakers can be connected to the MAIN OUT jacks on the front panel.
Recording can be done either with an optional SDR-3 SD recorder, or to an external recording device connected to the RCA record out jacks on the front panel.
NOTES:
If connecting a single mono signal to either CH. 5/6 or CH. 7/8, connect to the L(MONO) jack.
The optional UHF wireless mic channels require the SOURCE SELECT switch to be set to UHF.
POWER AMP ASSIGN switch must be best to MAIN L/
R+MONITOR