Axiom Pro User Guide | 47 |
Parameter: | PatchID |
Value Range: | On, Off |
| When this option is enabled, a “system exclusive” (SysEx) MIDI message that contains all the |
| settings of the selected Axiom Pro patch is sent out whenever a patch is recalled from the Load |
| Page. |
Parameter: | MIDI Out |
| |
Value Range: | USB, Keyboard |
| |
| The MIDI Out port on the back of Axiom Pro can be configured to transmit MIDI data generated by | ||
| the Axiom Pro keyboard or from the computer via the USB connection: | ||
| • | USB | The MIDI output port transmits data received from your audio application via the |
|
|
| USB connection. When this parameter is set to “USB,” the MIDI output port will |
|
|
| not transmit any data generated by the controls of the keyboard (i.e., buttons, |
|
|
| knobs, keys, etc.) |
| • | Keyboard | The MIDI output port will transmit the data generated by the controls of the |
|
|
| keyboard (i.e, keys, buttons, knobs, etc.) When this parameter is set to “Keyboard,” |
|
|
| any data sent to Axiom Pro through the USB connection will not be transmitted |
|
|
| through the MIDI output port. |
✓NOTE: MIDI data that is generated by the controls of Axiom Pro is always sent to your computer through the USB connection, regardless of how this parameter is configured. This parameter only affects the MIDI output port on the rear of the keyboard and determines what data is transmitted through the port.
Parameter: | Send All |
Value Range: | Send |
| When this parameter is selected, a “Send” option appears for Soft Key 4. Pressing this button will |
| send a SysEx dump of the entire memory contents of Axiom Pro out of the selected SysEx port (see |
| the SysEx parameter above to select a SysEx output port). |
| ✓ Tip for advanced MIDI users: It is also possible to trigger this function |
| externally. This is done by sending the following SysEx message to Axiom Pro: |
| F0 00 01 05 20 7F 01 7F F7 |