M-Audio Axiom Pro manual Tip, Global

Axiom Pro User Guide	34
Edit Mode > Group (Pad)
press 3	press P
	Axiom Pro 49/61
Axiom Pro 49/61	or
	press record
	Axiom Pro 25

Axiom Pro 25
Press the Edit Mode button, select option number 3 and then press “P” (Axiom Pro 25: press the	✓ Tip:
	You can directly
“Record” button) to open the Pad Group page.
	access this page by

The Edit Mode > Group (Pad) page displays parameters relating to the drum pads.

You can select one of the other groups of controls for editing by pressing the “N” “S” “E” and “P” group buttons on Axiom Pro 49/61. On Axiom Pro 25, use the “Play” and “Record” buttons to select the encoder and pad groups, respectively. 6

Note that this section of the User Guide covers the Pad group (the other groups are covered in the following sections of this guide).

first tapping any of the pads, pressing the Edit Mode button and selecting option number 3.

Parameter:	Name
Value Range:	(varies)
	This parameter lets you name the group of pads. Note that this name only appears within the
	Axiom Pro controller and does not affect your audio application in any way.
	To learn more about entering or changing Name parameters, see the box titled “Editing Name
	Parameters” in the “Edit Mode > Control” section.
Parameter:	Channel
Value Range:	Global, 1-16, Zone 1-4
	This parameter sets the MIDI output channel of the drum pads group. The parameter can be set in
	the following ways:
	•	Global	This sets the “group” MIDI channel for the drum pads to the same channel as specified
			on the Edit > Global page.
	•	1-16	This sets the “group” MIDI channel for the drum pads to a channel between 1 and 16.

•Zone 1-4This sets the “group” MIDI channel for the drum pads to the same channel as used by the selected keyboard zone (1 through 4). See Edit Mode > Zones > Data to learn how to set these output channels.

6Axiom Pro 25 does not have sliders or a numerical keypad, and therefore does not feature slider or numerical keypad groups.