FCC Information

1. IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!: This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Vocopro may void your authority, granted by the FCC, to use this product.

2.IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable(s) supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the U.S.A.

3.NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices. Compliance with these requirements provides a reasonable level of assurances that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the owner's manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit "Off" and "On", please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Use power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter(s).

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300-ohm ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact your local retailer authorized to distribute Vocopro products. If you can not locate the appropriate retailer, please contact Vocopro, 1728 Curtiss Court, La Verne, CA 91750.

CAUTION

The apparatus is not disconnected from the AC power source so long as it is connected to the wall outlet, even if the apparatus itself is turned off. To fully ensure that the apparatus is indeed fully void of residual power, leave unit disconnected from the AC outlet for at least fifteen seconds.

CAUTION:

READ THIS BEFORE OPERATING YOUR UNIT

1.To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2.Install your unit in a cool, dry, clean place - away from windows, heat sources, and too much vibration, dust, moisture or cold. Avoid sources of hum (transformers, v motors). To prevent fire or electrical shock, do not expose to rain and water.

3.Do not operate the unit upside-down.

4.Never open the cabinet. If a foreign object drops into the set, contact your dealer.

5.Place the unit in a location with adequate air circulation. Do not interfere with its proper ventilation; this will cause the internal temperature to rise and may result in a failure.

6.Do not use force on switches, knobs or cords. When moving the unit, first turn the unit off. Then gently disconnect the power plug and the cords connecting to other equipment. Never pull the cord itself.

7.Do not attempt to clean the unit with chemical solvents: this might damage the finish. Use a clean, dry cloth.

8.Be sure to read the "Troubleshooting" section on common operating errors before concluding that your unit is faulty.

9.This unit consumes a fair amount of power even when the power switch is turned off. We recommend that you unplug the power cord from the wall outlet if the unit is not going to be used for a long time. This will save electricity and help prevent fire hazards. To disconnect the cord, pull it out by grasping the plug. Never pull the cord itself.

10.To prevent lightning damage, pull out the power cord and remove the antenna cable during an electrical storm.

11.The general digital signals may interfere with other equipment such as tuners or receivers. Move the system farther away from such equipment if interference is observed.

NOTE:

Please check the copyright laws in your country before recording from records, compact discs, radio, etc. Recording of copyrighted material may infringe copyright laws.

Voltage Selector (General Model Only)

Be sure to position the voltage selector to match the voltage of your local power lines before installing the unit.

110V

UHF-8800 specifications

The VocoPro UHF-8800 is a professional-grade wireless microphone system designed for both seasoned performers and casual users seeking high-quality audio transmission. This versatile system operates in the UHF frequency range, ensuring minimal interference and reliable performance even in crowded environments. Its advanced technology makes it a popular choice for live performances, speeches, karaoke, and other events where clear audio is essential.

One of the standout features of the UHF-8800 is its dual-channel operation, which allows users to connect two microphones simultaneously. This is particularly useful for duets or panel discussions where multiple speakers need to be heard clearly. The system includes two handheld microphones that are ergonomically designed for comfort and usability, ensuring they are easy to hold during extended performances. Additionally, the microphones are equipped with high-quality dynamic capsules that capture vocals with clarity and richness.

The UHF-8800 boasts a broad frequency response, which contributes to its ability to reproduce vocals accurately across various tonal ranges. Users can benefit from a wide frequency range of up to 200 feet (60 meters) in open spaces, giving performers the freedom to move around without sacrificing sound quality. The system also features adjustable RF output power, allowing users to optimize their setup according to their specific environment.

In terms of connectivity, the UHF-8800 includes balanced XLR outputs, making it simple to integrate with a wide range of sound systems. The built-in LED display on the receiver provides real-time information about signal strength and battery status, ensuring that users can monitor their audio performance effectively.

With its robust build quality, the VocoPro UHF-8800 is designed to withstand the rigors of live events. The equipment is housed in a durable metal chassis that can endure the demands of frequent transport and setup. Furthermore, the system is provided with a user-friendly interface, allowing for easy operation even by those who may not be tech-savvy.

In summary, the VocoPro UHF-8800 is an exemplary choice for anyone in need of a reliable and high-performing wireless microphone system. With its dual-channel capability, broad frequency response, and user-friendly design, it provides everything necessary for successful audio performance, making it a worthy investment for professionals and hobbyists alike.