1. Connection to the network

1.5 Selecting the network connection method (continued)

(2) Entering the Passcode

If you select [Enter PassCode] at item 1.5, the “Please enter the PassCode” screen is displayed. Please enter the Passcode divided 4-digit each in 3 boxes (total 12-digit).

Example PASSCODE: 1234 - 5678 - 9ABC

After entering the Passcode, click the [Connect] to start the connection to the projector.

Proceed to item 1.8 Confirming the connection to your destination. (30)

If you click the [Back], the screen is back to item 1.5 Selecting the network connection method. (14)

NOTE • When entering the Passcode, capital and small letters are not distinguished.

If you are using a Subnet mask other than Class A, B or C, you will have to

establish the connection manually.

If the manual setting screen is displayed, please follow item 1.5.1 (3). (21)

[Troubleshooting]

„Incorrect PassCode.

The incorrect Passcode was input.

Click the [Back] to return to the “Please enter the PassCode” screen.

Check the PassCode on the projector screen (15) and enter the code again.

17

Page 130
Image 130
Hitachi ED-A220N user manual Entering the Passcode, Troubleshooting