Hitachi ED-A220N user manual Computer Access point, Hdmi

Setting up

Connecting with your devices (continued)

To use network functions of the projector, connect the LAN port with the computer's LAN port, or with an access point that is connected to the computer with wireless LAN, using a LAN cable. To use NETWORK BRIDGE function, also connect the CONTROL port and an RS-232C port of the external device to communicate as a network terminal. See the User's Manual - Network Guide for details of the network functions.

Computer

Access point

LAN RS-232C

	USB TYPE B	HDMI	COMPUTER IN2		COMPUTER IN1
USB
TYPE A
DC5V
0.5A
		MIC	AUDIO IN1	AUDIO IN3	AUDIO OUT	S-VIDEO
CONTROL	MONITOR OUT
			AUDIO IN2			VIDEO

CAUTION ►Before connecting the projector to a network system be sure to obtain the consent of the administrator of the network (64).

►Do not connect the LAN port to any network that might have the excessive voltage.

NOTE • If an oversized USB storage device blocks the LAN port, use a USB extension cable to connect the USB storage device.

13