Hitachi ED-A220N Using the automatic adjustment feature, Press Auto button on the remote control

Operating

Press the FOCUS + or FOCUS – button on the remote control, or FOCUS + or FOCUS – button on the projector (5) while no menu is on screen, to display the FOCUS box on screen. Use the FOCUS + and FOCUS – buttons to adjust the screen focus. After the focus adjustment, wait for a while until the FOCUS box is disappeared, if you want to display any other menu on screen by pushing the MENU button on the projector.

●The ◄/►/▲/▼ buttons on the projector work only as the cursor buttons while the template is displayed (51).

●FOCUS +/- button on the projector is invalid when the USB TYPE A port is selected as the input source.

FOCUS - button

VIDEO		MY SOURCE/
	COMPUTER DOC.CAMERA
ASPECT	AUTO	SEARCH	BLANK
MAGNIFY	FREEZE	PAGE	VOLUME
		UP

ON

DOWN

OFF

KEYSTONE MY BUTTON MUTE

12

-	FOCUS	+		D-ZOOM	+
			-

POSITIONMENU

FOCUS + button

Using the automatic adjustment feature

1.	Press AUTO button on the remote control.	AUTO button
	Pressing this button performs the following.

€For a computer signal

The vertical position, the horizontal position and the horizontal phase will be automatically adjusted.

Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting.

MY SOURCE/

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY FREEZE PAGE	VOLUME
UP

ON

DOWN

OFF

KEYSTONE MY BUTTON MUTE

12

€For a video signal and s-video signal

The video format best suited for the respective input signal will be selected

automatically. This function is available only when the AUTO is selected for the VIDEO FORMAT item in the INPUT menu (39). The vertical position and horizontal position will be automatically set to the default.

€For a component video signal

The vertical position and horizontal position will be automatically set to the default. The horizontal phase will be automatically adjusted.

●The automatic adjustment operation requires approx. 10 seconds. Also please note that it may not function correctly with some input.

●When this function is performed for a video signal, a certain extra such as a line may appear outside a picture.

●When this function is performed for a computer signal, a black frame may be displayed on the edge of the screen, depending on the PC model.

●The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (58).

24