Hitachi ED-A220N user manual Selecting My Connection

1.Connection to the network

1.4Selecting the network connection mode (continued)

1.4.2 Selecting My Connection

Select the [My Connection] and click the [Connect].

If you select the My Connection, the computer is connected to the projector through the network by using the prole data that is pre- assigned to My Connection. (35)

When you select the My Connection, the computer immediately starts the connection to the projector.

Proceed to item 1.8 Confirming the connection to your destination. (30)

NOTE • If the DHCP is set on in the projector, the network connection between the projector and computer may not be established since IP address may be varied. If you like to use the My Connection, set the DHCP off in the projector.

• If no prole data is assigned to the My Connection, it can’t be used.

[Troubleshooting]

„A network connection could not be established.

Windows prevented network conguration changes.

You may log in the Windows under User authority.

Click the [OK] to return to the screen to select the network connection mode. (10)

Consult to the network administrator and log in again under the Administrator

authority. After that, please resume at item 1.3.2 Starting the “LiveViewer”. (9)

12