Hitachi ED-A220N user manual Connecting with your devices, This is not a failure or malfunction

Arrangement (continued)

NOTE • The projector may make a rattling sound when tilted, moved or shaken, since a ap to control the air ow inside of the projector has moved. Be aware that

this is not a failure or malfunction.

Connecting with your devices

Be sure to read the manuals for devices before connecting them to the projector.

Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them.

For details, please see “User's Manual” - “Operating Guide” and “Network Guide”.

(20, 22)

• When AUTO is selected for the COMPUTER IN1 or COMPUTER IN2 port in

COMPUTER IN of the INPUT menu, that port will accept component video signals.

•To use network functions of the projector, connect the LAN port with the computer's LAN port, or with an access point that is connected to the computer with wireless LAN, using a LAN cable.

Computer

VCR/DVD/Blu-ray

Disc player

COMPONENT	Y Cb/Pb Cr/Pr
AUDIO OUT	R	USB
	L	TYPE A
		DC5V
		0.5A
	VIDEO
AUDIO OUT	L
	R

S-VIDEO	L
AUDIO OUT R

Access

point

USB TYPE B HDMI IN2 IN1

	MIC AUDIO IN1 AUDIO IN3 AUDIO OUT	S-VIDEO
CONTROL	MONITOR OUT
	AUDIO IN2	VIDEO

LAN
(A)	USB
HDMI
DISPLAY
OUT	AUDIO
RS-232C

• If you insert a USB storage device, such as a USB memory, into the USB TYPE A

port and select the port as the input source, you can view images stored in the device.

•You can connect a dynamic microphone to the MIC port with a 3.5 mm mini-plug. In that case, the built-in speaker outputs the sound from the microphone, even while the sound from the projector is output.

(continued on next page)

6