Hitachi ED-A220N user manual MyScreen registration is finished

SCREEN menu

Item Description

This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure.

1.Selecting this item displays a dialog titled “MyScreen”. It will ask you if you start capturing an image from the current screen.

Please wait for the target image to be displayed, and press the ENTER or INPUT button when the image is displayed. The image will freeze and the frame for capturing will appear.

To stop performing, press the RESET button on the remote control.

2.Using the ▲/▼/◄/► buttons adjusts the frame position.

	Please move the frame to the position
	of the image which you want to use. The
MyScreen	frame may not be able to be moved for
	some input signals.
	To start registration, press the ENTER
	or INPUT button on the remote control.
	To restore the screen and return to the previous dialog, press the
	RESET button on the remote control.
	Registration may take several minutes.
	When the registration is completed, the registered screen and the
	following message is displayed for several seconds:
	“MyScreen registration is finished.”
	If the registration failed, the following message is displayed:
	“A capturing error has occurred. Please try again.”

•This function cannot be selected when the ON is selected to the MyScreen Lock item (49).

•This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu (72).

•This function is unavailable for a signal from the LAN, USB TYPE A, USB TYPE B or HDMI port.

(continued on next page)

48