Hitachi ED-A220N user manual Manual configuration, Network settings manually 1 Profile connection

1. Connection to the network

1.6 Manual configuration

There are 3 options for the manual conguration.

•Prole (below)

•History (24)

•Congure Network Settings Manually (25)

If you select Congure Network Settings

Manually, proceed to item 1.7 Configuring the

network settings manually. (25)

1.6.1 Profile connection

Selecting a prole data connect the network with the projector.

It is required to store the prole data in advance. (33)

1)Select the [Profile].

2)Choose a prole data listed in the window.

3)Click the [Connect].

4)The network connection will be established. Proceed to item 1.8 Confirming the connection to your destination. (30)

NOTE • To check the setting in a prole data, follow the process below.

1)Choose a prole data that you want to check.

2)Move the mouse cursor to the prole data, and click the right button on the mouse to display a pop-up menu.

3)Select the “Property” in the pop-up menu, and click the left button on the mouse.

4)The setting information of the selected prole data is shown.

•If the DHCP is set on in the projector, the network connection between the

projector and computer may not be established since IP address may be varied. If you like to use the Prole connection, set the DHCP off in the projector.

23